Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.


Abiquo 4.6

Skip to end of metadata
Go to start of metadata

Before you create an action plan, consider the elements that you wish to automate with the action plan. Create VMs or scaling groups, fetch metrics, and create alarms and alerts.

To create an action plan:

  1. Go to Control → Action plans, and click the + add button 
  2. Enter the action plan details
  3. Add actions: 
    1. Click the + Add button
    2. Select a general action or select a VM or scaling group and a specific action type from the pulldown list
    3. Enter parameters as required 
    Consider the following constraints on actions
    • Maintenance block: You can create one complete maintenance block (start maintenance, action(s), and stop maintenance) and the maintenance block cannot contain any scaling actions
    • Scale in and/or scale out actions: You can only scale in and/or scale out at the end of the action plan but you can create the scaling action(s) in any order (e.g. scale in first, only scale in)
    • Email actions: You can perform an email action at any time, including after scaling actions
    • Platform constraints: For example, to create an instance, the VM must be deployed and powered off 
    • Hypervisor constraints: For example, when using hot reconfigure on ESXi, you cannot decrement CPU or RAM

Put the actions in run order using the arrow buttons. Delete actions as required using the trash can button to the left of the action name.

 Field

Description

Virtual machine

The name of the VM

Name

The name of the action plan

DescriptionA description of the action plan
Actions

See List of actions for action plans

Action parameters

See Action parameters table.
Note that you can request the JSON schema for each action plan entry type from the API.
See: https://wiki.abiquo.com/api/latest/ActionPlansResource.html#list-action-plan-entry-templates


Action parameters table

ActionParameters
Increase CPUvCPUs
Decrease CPUvCPUs. Not supported by hot-reconfigure. Check OS compatibility
Increase RAM
  • RAM
  • RAM unit of GB or MB
Decrease RAM
  • RAM. Not supported by hot-reconfigure. Check OS compatibility
  • RAM unit of GB or MB 
Resize disk
  • Amount
  • Disk unit of GB or MB
  • Selected disk
Instance
  • Name for Instance (clone) template. The platform will append the date to the name supplied
  • All disks or selected disks
Send email
  • Subject
  • Body
  • To (email addresses). Click the add + button to add an email address
  • Cc (copy to these addresses)
Set hardware profileSelect from the available hardware profiles



To run the action plan automatically, go to the Triggers tab and create an alert or schedule trigger.