Abiquo Documentation Cookies Policy

Our Documentation website uses cookies to improve your experience. Please visit our Cookie Policy page for more information about cookies and how we use them.


Abiquo 5.0

Skip to end of metadata
Go to start of metadata

This document contains basic information about the Abiquo User Interface Messages. These are the default messages available with Abiquo but you can customize them. See Customizing and translating UI error messages. To view changes to these messages between versions, the clearest comparison of changes is in the UI customization section. See UI Error Messages 

As the Abiquo UI uses the Abiquo API, these are the messages are generated by the Abiquo API, but some of them will never be triggered or displayed by the Abiquo UI. The full list of API error messages is included in the Response Errors section of the Developer's Guide. 


Internal Message ID __________________

Message ____________________________________________________________

Status codes

 

400-BAD-REQUEST

Request not valid

401-UNAUTHORIZED

This request requires user authentication

403-FORBIDDEN

Access denied

404-NOT-FOUND

The requested resource does not exist

405-METHOD-NOT-ALLOWED

The resource does not expose this method

406-NOT-ACCEPTABLE

Invalid version parameter for 'Accept' header

409-CONFLICT

Conflict

409-CONFLICT-NotImpemented

Not Implemented

409-CONFLICT-StaleObject

Another request has updated this entity

412-PRECONDITION-FAILED

Error releasing resources on the hypervisor

412-PRECONDITION-FAILED-HEADER

Header 'X-abiquo-version' is mandatory

415-UNSUPPORTED-MEDIA-TYPE

The Abiquo API currently only supports application/XML Media Type

415-UNSUPPORTED-MEDIA-TYPE-VERSION

Invalid 'Content-type' version

500-INTERNAL-SERVER-ERROR

Unexpected exception

503-SERVICE-UNAVAILABLE

Service unavailable: try again in a few moments

503-SERVICE-UNAVAILABLE_PERSISTENT

Service unavailable: try again in a few moments

Action plans

 

AP-0

The requested action plan does not exist

AP-1

The requested action plan task has an unexpected type

AP-2

The extra data of the requested action plan task refers to a different action plan

AP-3

Failed while executing action plan

AP-4

The given action plan is null

AP-5

The action plan entry collection is empty

AP-6

The collection of entries in the action plan contains non-unique sequences

AP-7

The collection of entries in the action plan contains null elements

AP-8

All entries in the action plan have been executed

AP-9

Unknown action plan entry type

AP-10

The supplied entry parameter for the action plan is not valid

AP-11

The supplied entry sequence for the action plan is not valid

AP-12

The supplied entry for the action plan requires a virtual machine link

AP-13

The supplied entry for the action plan requires a scaling group link

AP-14

Unable to unschedule the action plan

AP-15

The schedule for the action plan already exists

AP-16

Unable to schedule the action plan

AP-17

The requested schedule for the action plan does not exist

AP-18

Unable to reschedule action plan

AP-19

Duplicated trigger for alert and action plan

AP-20

The requested alert trigger for the action plan does not exist

AP-21

The action to set a hardware profile is not allowed for virtual machines without hardware profile support

AP-22

The action to reconfigure RAM or CPU is not allowed for virtual machines using hardware profiles

AP-23

The supplied entry for the action plan is not valid

AP-24

Action plan entry configuration does not have the required links

AP-25

Action plan entry requires configuration

AP-26

Action plan entry configuration does not match the JSON schema

AP-27

Instance action requires a name

AP-28

Instance action requires a valid name

AP-29

Invalid disk sequence for instance action

AP-30

Send email action requires a nonempty subject

AP-31

Send email action requires a nonempty body

AP-32

Send email action requires a nonempty list of addresses

AP-33

Unable to parse action plan entry configuration from database

AP-34

Unable to validate the action plan entry against the JSON schema

AP-35

I/O error while validating the action plan entry against the JSON schema

AP-36

Send webhook action requires a nonempty endpoint

AP-37

Send webhook action requires a nonempty and valid HTTP method

AP-38

Send webhook action requires a nonempty expected response HTTP status code

AP-39

Send webhook action requires a well-formed endpoint

Allocation and shared server rules

 

RULE-1

The requested restrict shared server rule does not exist

RULE-2

The requested load balance rule does not exist

RULE-3

The requested load level rule does not exist

RULE-4

At least one load balance rule is required

RULE-5

Expected one link with the rel attribute with possible values (datacenter/rack/machine/cluster)

RULE-6

The allocation type indicated is null or invalid

RULE-7

Duplicated rule for the same set of infrastructure elements. Please check and remove existent rules first.

RULE-8

The storage percentage indicated is null or invalid

RULE-9

Expected one link with the rel attribute with possible values (datacenter/datastoretier/datastore)

RULE-10

The required CPU resources exceed the capacity allowed by the servers

RULE-11

The required RAM resources exceed the capacity allowed by the servers

RULE-12

The required hard disk exceeds the capacity allowed by the servers

Allocator

 

ALLOC-0

There are not enough resources to create the virtual machine

ALLOC-1

Cannot make the requested changes to the virtual machine because there are not enough free resources on the host machine. Please contact the Administrator.

ALLOC-2

There are not enough VLAN tags available

Appliance manager

 

AM-0

Failed appliance manager communication

AM-1

Timeout during appliance manager communication

AM-2

AM service unavailable; please check the URL of the service.

AM-3

Failed appliance manager request. It is possible that the repositoryLocation property is not correct, NFS is not available or NFS privileges do not allow access to the server.

AM-4

Template file was not found. It is possible that the repository is not properly refreshed; request a refresh or wait for the periodic repository check.

Async task

 

ASYNC-TASK-1

Unable to enqueue async task

ASYNC-TASK-2

Unable to operate with a Taskable related to a task in progress

Asynchronous task

 

ASYNC-TASK-1

Unable to enqueue async task

ASYNC-TASK-2

Unable to operate with a Taskable related to a task in progress

Availability set

 

AVSET-1

The availability set does not exist

AVSET-2

The availability set cannot be deleted. Before deleting an availability set please ensure that it does not contain any VM

AVSET-3

Need credentials to perform this action

AVSET-4

The provided availability set link is invalid

AVSET-5

The given availability set not compatible with the given virtual datacenter

AVSET-6

The availability set is being used by virtual machines and cannot be modified

AVSET-7

When editing an availability set, you may only change the virtual datacenter

AVSET-8

Name, fault domains ande update domains are required

AVSET-9

There is already one availaility set with the same name

Availability zones

 

AVZONE-1

The availability zone does not exist

AVZONE-2

The availability zone link is not valid

AVZONE-4

Need credentials to perform this action

AVZONE-5

Availability zone does not have a providerId (it has been deleted in the provider) so cannot perform the current action

Backup

 

BC-1

The requested backup template does not exist

BC-2

A backup with the requested template already exists

BC-3

The requested backup datacenter does not exist

BC-4

The requested backup attribute does not exist

BC-5

Some backup type values are wrong. Check that all type values are correctly spelled and written in lower-case letters

BC-6

Some of the requested options are not enabled

BC-7

Some backup week days are wrong

BC-8

Some of the requested periods are wrong

BC-9

Paths can only be requested for filesystem backup type

BC-10

Disks can only be requested for complete or snapshot backup type

BC-11

Time value not supplied for '%s'

BC-12

Invalid time for '%s'. Time format should be HH:mm:ss Z

BC-13

Invalid date for '%s'. Date format should be yyyy/MM/dd HH:mm:ss Z

BC-14

Missing backup values

BC-15

Valid status values are: done, progress, failed

BC-16

Accepted values for hours backup are 0 to 24. E.g., every 5 hours

BC-17

Invalid values for disks. Provide a list of disks

BC-18

Invalid values for paths. Provide a list of paths

BC-19

Weekly planned backup requires a day to be selected

BC-20

No backup has been made with the ID provided in the restore request

BC-22

A backup with the given ID has been found but its state should correspond to done or completed in order to restore it

BC-23

The requested backup policy does not exist

BC-24

The backup policy code is duplicated in this datacenter

BC-25

Cannot delete the backup policy '%s' because there are already virtual machines with that policy assigned

BC-26

The backup policy cannot be edited if the virtual machine is deployed

BC-27

Cannot select multiple backup policies

BC-28

Invalid day of week specified

BC-29

Cannot update the backup configurations of the backup policy because there are already virtual machines with that policy assigned

BC-30

Backup type/subtype must be unique for each policy.

BC-31

The replication value must be 'true' or 'false'

BC-32

Backup configuration was not found in the given policy

BC-33

Backup type and subtype are required for a backup configuration

BC-34

Missing backup policy link

BC-35

Backup manager does not allow changes to the backup configuration of the virtual machine in the current state

BC-36

Backup configuration cannot be modified while the virtual machine is deployed

BC-37

Backup result not found

BC-38

Backup plugin not loaded

BC-39

A backup manager already exists for this datacenter

BC-40

Backup manager not found

BC-41

No backup result found with the given id

BC-42

The virtual machine must be deployed in order to request an on demand backup

BC-43

The virtual machine must be deployed in order to request a restore

BC-44

The virtual machine must be powered off in order to request a restore

BC-45

The backup provider does not allow configuration at deploy action, reconfigure the virtual machine to add the backup

Billing records

 

BILL_REGISTER-0

The bill register for the given date, enterprise, and provider already exists

BILL_REGISTER-1

The requested bill register does not exist

BILL_REGISTER-2

All the bill registers must be from the same billing period

BILL_REGISTER-3

The bill register for a day must be inside the specified period

BILL_REGISTER-4

Cannot insert a bill register for a consolidated bill

BILL_REGISTER-5

Cannot insert bill registers because the previous amount is higher than the current amount.

Bills

 

BILL-0

Invalid provider

BILL-1

The end date must be after the start date

BILL-3

A bill for this period already exists

BILL-4

The requested bill does not exist

BILL-5

Invalid date

BILL-6

Invalid request. At least one category should be specified

BILL-7

Invalid request. This endpoint does not allow you to insert categorized bills

Category

 

CATEGORY-1

The requested category does not exist

CATEGORY-2

A category with this name already exists.

CATEGORY-3

This category cannot be deleted

CATEGORY-4

Invalid category identifier in the category link

CATEGORY-5

Category name cannot be null

CATEGORY-6

Cannot move a local category to another enterprise.

CATEGORY-7

Current user does not have enough privileges to create a global category.

CATEGORY-8

Cannot change a global category to a local category.

CATEGORY-9

Current user does not have enough privileges to remove this category.

CATEGORY-10

Cannot share the VM template because it is in a local category

CATEGORY-11

Cannot change the category to a local one if the VM template is shared

CATEGORY-12

Current user does not have enough privileges to modify a local category.

Check edit

 

EDIT-01

This method requires the virtual machine to be deployed on a target hypervisor

Chef

 

CHEF-0

Could not get the list of available recipes for the enterprise

CHEF-1

Could not get the list of available Chef roles for the enterprise

CHEF-2

An unexpected error occurred while connecting to the Chef server. Please contact the Administrator.

CHEF-3

The node does not exist on the Chef Server. If the virtual machine is bootstrapping, please wait until the process completes.

CHEF-4

The given runlist element does not exist on the Chef Server

CHEF-5

The node could not be updated on the Chef Server. Please contact the Administrator.

CHEF-6

Could not connect to the Chef server. Please contact the Administrator

CHEF-7

Could not connect to the Chef server with the given Admin data. Please verify the credentials

CHEF-8

The enterprise is not configured to use Chef

CHEF-9

The virtual machine cannot use Chef. Please check that the template is Chef enabled and the Enterprise can use Chef

CHEF-10

The validator certificate supplied is not a valid private key. Please verify the key format

CHEF-11

The admin certificate supplied is not a valid private key. Please verify the key format

CHEF-12

The Chef server URL supplied is malformed

CHEF-13

The validator client supplied does not exist

CHEF-14

Could not connect to the Chef server to perform the request. Please check that the client has the appropriate permissions to perform the task

CHEF-15

The supplied Chef attributes are not valid JSON

Classic firewall rules

 

CLASSIC-FIREWALL-RULE-1

The classic firewall was not found

CLASSIC-FIREWALL-RULE-2

The classic firewall rule was not found in the expected sequence. Try to synchronize.

CLASSIC-FIREWALL-RULE-3

Source and Destination ports should be positive integers. Range can only be supplied when port is supplied and it should be greater

CLASSIC-FIREWALL-RULE-4

Cannot edit the sequence, use the reorder action

CLASSIC-FIREWALL-RULE-5

Cannot specify a noncontiguous sequence

CLASSIC-FIREWALL-RULE-6

Cannot reorder in the current sequence

Classic firewalls

 

CLASSIC-FIREWALL-1

The classic firewall was not found

CLASSIC-FIREWALL-2

Need credentials to perform this action

CLASSIC-FIREWALL-3

Operation not supported by the device

CLASSIC-FIREWALL-4

The classic firewall does not have any rules

CLASSIC-FIREWALL-5

The classic firewall has rules with sequences that are not contiguous

CLASSIC-FIREWALL-6

The classic firewall has another operation in progress, please wait

Cloud nodes

 

CLOUDNODE-1

The requested cloud node UID does not exist

Cloud provider proxy

 

CPP-0

Remote service unavailable; check the URL of the service.

CPP-1

Remote service not found

Cluster

 

CLUSTER-0

The requested cluster does not exist

CLUSTER-1

Cluster already exists in another rack

Controller

 

ED-1

Cannot attach more than 4 disks to an IDE controller

Conversion

 

CONVERSION-0

Invalid DiskFormat for the conversion; allowed values: RAW, VMDK_STREAM_OPTIMIZED, VMDK_FLAT, VMDK_SPARSE, VHD_FLAT, VHD_SPARSE, VDI_FLAT, VDI_SPARSE, QCOW2_FLAT, QCOW2_SPARSE

CONVERSION-1

The requested conversion does not exist

CONVERSION-2

The requested conversion already exists for the given virtual machine template and disk format

CONVERSION-3

The requested conversion format is the same as the base format of the virtual machine template

CONVERSION-4

Could not restart the requested conversion because it had not failed

CONVERSION-5

Conversion state is QUEUED but it does not have an associated task; try deleting the conversion before retrying.

CONVERSION-6

Failed to send conversion of template.

CONVERSION-8

Cannot request a conversion of an empty disk.

CONVERSION-9

Cannot request a conversion with the current source disk format

CONVERSION-10

Cannot request a conversion with the requested target disk format

Cost code

 

COSTCODE-0

The requested cost code does not exist

COSTCODE-1

Missing cost code parameter

COSTCODE-2

Duplicate name for cost code

COSTCODE-3

Cost code name is required

COSTCODE-4

Cost code description is required

COSTCODE-5

Cost code name: maximum length is 20 characters

COSTCODE-6

Cost code description: maximum length is 100 characters

COSTCODE-7

Cost code cannot be deleted because it is assigned to one or more virtual machine templates

COSTCODE-8

Missing cost code link

COSTCODE-9

The cost code is used by hardware profile/s and cannot be deleted

Cost usage

 

COST-USAGE-0

The validation has failed because there is some missing usage data. Try to regenerate it or contact your administrator for more details.

COST-USAGE-1

The price by intervals has not been defined. It should be defined and the last interval should have no maximum number of VMs.

Currency

 

CURRENCY-0

The requested currency does not exist

CURRENCY-1

At least one currency is required

CURRENCY-2

Duplicate name for currency

CURRENCY-3

Cannot remove currency associated with a pricing model

CURRENCY-4

Currency name is required

CURRENCY-5

Currency symbol is required

CURRENCY-6

Currency name: maximum length is 20 characters

CURRENCY-7

Currency symbol: maximum length is 10 characters

CURRENCY-8

Currency digit: maximum value is 9

CURRENCY-9

Missing currency link

DHCP option

 

DHCP_OPTION-0

The requested DHCP option does not exist

DHCP_OPTION-12

Missing DHCP option parameter

DVD

 

DVD-1

The requested DVD does not exist

DVD-2

Virtual machine template link with rel 'image' is mandatory

Database

 

DB-0

Another request has updated this entity. Try again in a few moments

DB-1

Deadlock found when trying to get lock. Try again in a few moments

Datacenter

 

DC-0

The requested datacenter does not exist

DC-3

There is already a datacenter with that name

DC-4

The current enterprise cannot use this datacenter

DC-5

Cannot delete datacenter with storage devices associated

DC-6

Cannot delete datacenter with virtual datacenters associated

DC-7

Datacenter queues are not configured (check the BPM and virtual factory remote services)

DC-8

Missing datacenter link

DC-9

Invalid datacenter link

DC-10

There are not enough resources available in the datacenter. Try again in a few minutes and if the error persists, please contact your System Administrator.

DC-11

Cannot delete datacenter with devices associated

DC-12

Cannot modify the datacenter name because the backup manager requires it for internal configuration

Datacenter hardware profile

 

PROFILEDC-0

Hardware profile name must be unique for each datacenter

PROFILEDC-1

Hardware profile with same combination of CPU/RAM/COSTCODE or dynamic fields already exists for this datacenter

PROFILEDC-2

The requested hardware profile does not exist in this datacenter

PROFILEDC-3

Cannot delete a datacenter hardware profile that is being used by virtual machines

PROFILEDC-4

Cannot update a datacenter hardware profile that is being used by virtual machines

PROFILEDC-5

Create hardware profile is not supported for the public cloud region

PROFILEDC-6

Update hardware profile is not supported for the public cloud region

PROFILEDC-7

Delete hardware profile is not supported for the public cloud region

PROFILEDC-8

Hardware profile synchronization is not supported for the public cloud region

Datacenter repository

 

DATACENTER-REPOSITORY-NOT-CREATED

Datacenter repository not configured; check the appliance manager of the datacenter. Contact your Infrastructure Administrator

Datastore

 

DATASTORE-0

The requested datastore does not exist

DATASTORE-4

Duplicate name for the datastore

DATASTORE-5

Duplicate root path for the datastore

DATASTORE-6

Duplicate directory path for the datastore

DATASTORE-7

The datastore is not assigned to that machine

DATASTORE-8

Missing datastore link

DATASTORE-9

Invalid datastore link

DATASTORE-10

The datastore cannot be enabled because it no longer exists on the target machine

DATASTORE-11

The datastore is not assigned to that datastore tier

DATASTORE-12

The shared datastore is already in use in another datacenter

DATASTORE-13

Datastore with same rootPath is in use with another UUID. Please update datastore uuid folder mark to the expected UUID

Datastore tiers

 

DSTIER-0

The requested datastore tier does not exist

DSTIER-1

The datastore tier cannot be deleted because it is the default datastore tier of the datacenter

DSTIER-2

Cannot modify the datastore tier of a datastore with deployed virtual machines

DSTIER-3

Cannot delete the datastore tier with deployed virtual machines

DSTIER-4

Invalid datastore tier link

DSTIER-5

The datacenter must have a default datastore tier

DSTIER-6

Cannot modify the datastore tier from a deployed disk

DSTIER-7

The name of the datastore tier must be unique by datacenter

DSTIER-8

Cannot deploy a virtual machine '%s' with any disk without enabled datastore tiers

DSTIER-9

The original enterprise is not allowed to use the given tier

DSTIER-10

Missing link to datastore tier

Device type

 

DEVICETYPE-1

The device type does not exist

DEVICETYPE-2

Missing device type link

Disks

 

DISK-1

Missing disk link

DISK-2

Invalid disk link

DISK-3

Disk not found

DISK-4

Disk invalid sequence

DISK-5

Invalid empty disk. Path, diskFileSize and diskFormatType are not allowed

DISK-6

Cannot modify disk sequence. Edit the virtual machine template.

DISK-7

Cannot copy empty disk.

DISK-8

Invalid disk format type.

Enterprise

 

EN-0

The requested enterprise does not exist

ENTERPRISE-4

Duplicate name for an enterprise

ENTERPRISE-5

Cannot delete enterprise with virtual datacenters associated

ENTERPRISE-6

Cannot delete the current user's enterprise

ENTERPRISE-7

Enterprise name cannot be empty

ENTERPRISE-8

Missing enterprise link

ENTERPRISE-9

Cannot delete enterprise because some users have roles that cannot be deleted, please change their enterprise before continuing

ENTERPRISE-10

The enterprise does not have permission to use the requested datacenter

ENTERPRISE-11

Invalid enterprise identifier in the enterprise link

ENTERPRISE-12

Missing link to the pricing template

ENTERPRISE-13

Missing pricing template parameter

ENTERPRISE-14

You do not have enough privileges to configure the Chef properties

ENTERPRISE-15

You do not have enough privileges to set the enterprise theme

ENTERPRISE-16

The enterprise does not have permission to use the requested datastore tier

ENTERPRISE-17

Cannot delete the enterprise or remove its access to the cloud location because it has firewalls

ENTERPRISE-18

Cannot delete the enterprise or remove its access to the cloud location because it has load balancers

ENTERPRISE-19

Cannot delete the enterprise or remove its access to the cloud location because it has floating IPs

ENTERPRISE-20

Cannot set the enterprise as a reseller for this scope because it already has a reseller.

ENTERPRISE-21

Cannot set the enterprise as a key node for this scope because it already has a key node.

ENTERPRISE-22

This action can only be performed on a reseller enterprise.

ENTERPRISE-23

This action can only be performed on a key node enterprise.

ENTERPRISE-24

Missing reseller link

ENTERPRISE-25

Missing key node link

ENTERPRISE-26

The request cannot contain more than one key node link

ENTERPRISE-27

Cannot delete the enterprise or remove its access to the cloud location because it has availability sets

ENTERPRISE-28

Server mail details can be edit only for reseller enterprise.

ENTERPRISE-29

All server mail details are required.

Enterprise properties

 

ENPROP-0

The requested enterprise properties do not exist

ENPROP-1

Enterprise properties are required

ENPROP-2

Invalid property key. A hidden property could be using the same key.

ENPROP-3

The property key is required

ENPROP-4

Multiple values for enterprise property filtering

Events

 

EVENT-0

This event does not exist

EVENT-1

Query parameters dates are expected to use ISO 8601 format (ex: 2011-12-03T10:15:30Z).

Excluded network

 

EXCLUDEDNETWORK-0

The requested excluded network does not exist

EXCLUDEDNETWORK-1

Address attribute is required

EXCLUDEDNETWORK-2

Mask attribute is required and must be equal or greater than 0

EXCLUDEDNETWORK-3

The network does not match the mask. Check your request

EXCLUDEDNETWORK-4

IP format is invalid

EXCLUDEDNETWORK-5

IPv6 networks can have a netmask of 64, 56 or 48

EXCLUDEDNETWORK-6

The range to exclude is already in use by another existing network

EXCLUDEDNETWORK-7

Name attribute is required

External scope

 

EXTERNAL_SCOPE-1

There are multiple entries for the requested scope

Firewall

 

FIREWALLPOLICY-1

The name is required

FIREWALLPOLICY-2

The description is required

FIREWALLPOLICY-5

The requested firewall policy does not exist

FIREWALLPOLICY-6

The firewall policy is being used by virtual machines and/or load balancers and cannot be modified

FIREWALLPOLICY-7

Virtual machines cannot be attached to firewall policy in the provider. Ensure the firewall policy is properly created

FIREWALLPOLICY-8

An unexpected error occurred while assigning virtual machines to load balancer

FIREWALLPOLICY-9

Cannot find the default firewall. Please synchronize virtual datacenter

FIREWALLPOLICY-10

Only a firewall assigned to the virtual datacenter can be set as the default

FIREWALLPOLICY-11

A default firewall is required

FIREWALLRULE-1

The protocol is required

FIREWALLRULE-2

The port field for the start of the port range is required

FIREWALLRULE-3

The port field for the end of the port range is required

FIREWALLRULE-4

The targets list is required for an egress rule or the sources list for an ingress rule

FIREWALLRULE-5

Firewall rule can be egress or ingress but not both. Complete either targets or sources only

Floating IPs

 

FLOATINGIP-1

The floating IP does not exist

FLOATINGIP-2

The floating IP is currently used by a virtual machine. It cannot be released

FLOATINGIP-3

Cannot create a floating IP in the given location

Generic

 

GEN-0

Malformed URI

GEN-1

Identifier cannot be 0

GEN-2

Invalid XML document; please ensure all mandatory fields are correct

GEN-3

Invalid XML document

GEN-4

Not enough permissions to perform this action

GEN-5

Invalid credentials

GEN-6

Invalid link reference

GEN-7

The property 'name' must not have whitespace at the beginning or the end

GEN-8

The property 'symbol' must not have whitespace at the beginning or the end

GEN-9

The property 'description' must not have whitespace at the beginning or the end

GEN-10

Identifier is required

GEN-11

The identifier field cannot be used to create entities

GEN-12

Invalid private network type

GEN-13

Unexpected error

GEN-14

The operation could not be performed. Please contact your System Administrator

GEN-15

Not enough privileges to perform this operation

GEN-16

The ID parameter is different from the entity ID

GEN-17

The plugin type was not found

GEN-18

The requested operation is not supported by the hypervisor plugin

GEN-19

The supplied connection is not valid for the hypervisor plugin

GEN-20

The requested virtual machine definition cannot be applied by the hypervisor plugin

GEN-21

The requested plugin is not a cloud provider plugin type

GEN-22

Query parameters are invalid or a required query parameter is missing

GEN-23

The operation requires authentication to the provider and the X-Abiquo-PCR-Identity, X-Abiquo-PCR-Credential and X-Abiquo-PCR-Endpoint headers must be set

GEN-24

The requested disk controller is not supported by the hypervisor plugin

GEN-25

The current hypervisor plugin does not support ISO format

GEN-26

Plugin operation requires enterprise properties

GEN-27

Cannot create VPC, use synchronize

GEN-28

Cannot create Network, use synchronize

GEN-30

Cannot create Firewall, use synchronize

GEN-31

Cannot create LoadBalancer, use synchronize

GEN-32

Invalid pricing credentials

Hard disk

 

HD-1

The requested hard disk does not exist

HD-2

Disk 0 is the system disk and cannot be deleted from the virtual machine

HD-3

Invalid disk size.

HD-4

Cannot perform this action because the hard disk is currently attached to a virtual machine

HD-5

Invalid link to the hard disk to attach

HD-6

Invalid virtual datacenter in the link to the volume to attach

HD-7

Cannot create a hard disk because this feature is not available for this hypervisor

HD-8

The size of the hard disk cannot be reduced

HD-9

Cannot perform this action because hard disk resize is not available for this hypervisor

HD-10

Invalid hard disk attachment sequence number

HD-11

Cannot perform this action because the hard disk is not attached to a virtual machine

HD-12

The hard disk cannot be edited because it is being used by a virtual machine

HD-13

The hard disk cannot be resized because the virtual machine is not deployed

HD-14

It's only possible to create a new hard disk from an ISO disk

HD-15

Only the IDE disk controller type is supported for the ISO disk format type

HD-16

The hard disk cannot be resized because it is using the ISO disk format type

HD-17

Cannot modify sequence 0; use virtual machine edit to reorder attached disks

HD-18

The hard disk cannot be resized because the virtual machine is not deployed. It looks like the virtual machine was deployed, then the disk resized and now it is attempting to redeploy. Please set the HD required size to the original (specified in the template)

HD-19

Allocation is not supported in the target hypervisor type

HD-20

Cannot change disk allocation in an already deployed disk

HD-21

Cannot edit disk allocation

Hardware profile

 

PROFILE-0

Duplicate name for hardware profile

PROFILE-1

The requested hardware profile does not exist

PROFILE-2

Cannot create the hardware profile because the requested datacenter is a public datacenter

PROFILE-3

Invalid link to the hardware profile; cannot get profile values

PROFILE-5

Missing hardware profile link

PROFILE-6

Inactive hardware profile. Select another one.

PROFILE-7

CPU/RAM/CoresPerSocket values do not match hardware profile

PROFILE-9

CPU/RAM values cannot be empty for not dynamic fields of CPU/RAM

PROFILE-10

CPU/RAM have invalid values

Hypervisor plugin

 

HYP-01

Unable to connect; invalid hypervisor location (IP or port)

IDE controller

 

ED-1

Cannot attach more than 4 disks to an IDE controller

EDIT-01

This method requires the virtual machine to be deployed on a target hypervisor

Icons

 

ICON-1

Duplicate path for an icon

ICON-2

The requested icon does not exist

ICON-3

No icon found with the requested path

ICON-4

Cannot delete the icon because it is in use by a virtual machine template

ICON-5

Invalid icon identifier in the icon link

Job

 

JOB-1

The requested job does not exist

License

 

LICENSE-0

The requested license does not exist

LICENSE-1

The license provided is not valid

LICENSE-2

Could not initialize licensing ciphers

LICENSE-3

Could not read licensing cipher key

LICENSE-4

The maximum number of managed cores has been reached - please use the Abiquo support portal or email sales@abiquo.com for a trial or production license

LICENSE-5

The license is already being used

Limits

 

LIMIT-6

Invalid VLAN hard limit; this cannot be greater than the number of VLANS per virtual datacenter: {0}

LIMIT-7

Duplicate limits by enterprise and datacenter

LIMIT-8

Limits by enterprise and datacenter do not exist

LIMIT-9

Cannot edit resource limits; current enterprise allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

LIMIT-10

Cannot edit resource limits; current enterprise and datacenter allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

LIMIT-11

Cannot remove enterprise access to this datacenter because the datacenter is used by virtual datacenter(s) belonging to the enterprise

LIMIT-12

Cannot remove enterprise access to this datacenter because the datacenter has network(s) belonging to the enterprise

LIMIT-13

Cannot edit resource limits; current enterprise allocation exceeds the new specified limits

LIMIT-14

Cannot edit resource limits; current datacenter allocation exceeds the new specified limits

LIMIT-15

Invalid link of the tier to allow

LIMIT-16

Datacenter identifier from tier link does not match the identifier from datacenter link

LIMIT-17

Cannot restrict the tier because the enterprise has already created volumes in it

LIMIT-18

Not enough permissions to create/edit the limit in this datacenter

LIMIT-19

Not enough permissions to allow new tiers in this datacenter

LIMIT-20

Invalid link of the datastore tier to allow

LIMIT-21

Datacenter identifier from datastore tier link does not match the identifier from datacenter link

LIMIT-22

Cannot restrict the datastore tier because the enterprise has already created virtual machines in it

LIMIT-23

Not enough permissions to allow new datastore tiers in this datacenter

LIMIT-24

Invalid link of the backup policy to allow

LIMIT-25

Cannot restrict the backup policy '%s' because the enterprise already has virtual machines with that policy assigned

LIMIT-26

Invalid link of hardware profile to allow

LIMIT-27

Datacenter identifier from hardware profile link does not match the identifier from datacenter link

LIMIT-28

Not enough permissions to allow new hardware profiles in this datacenter

LIMIT-29

Disabling hardware profile for this limit is not supported

LIMIT-30

Cannot restrict the hardware profile because the enterprise already has virtual machines with that hardware profile assigned

LIMIT-31

Cannot allow inactive hardware profiles

LIMITS_EXCEEDED

The required resources exceed the allowed limits

SOFT_LIMIT_EXCEEDED

The required resources exceed the soft limits

Link

 

LINK-0

The 'rel' property of the link is required

LINK-1

The 'href' property of the link is required

LINK-5

Link was not found

Load balancer

 

LOADBALANCER-1

The requested load balancer does not exist

LOADBALANCER-2

The requested routing rule does not exist

LOADBALANCER-3

This is the only routing rule of the load balancer and it cannot be deleted. To remove it, delete the load balancer.

LOADBALANCER-4

A routing rule with the same port in and port out already exists for the load balancer

LOADBALANCER-5

Routing rule belongs to a load balancer that cannot be modified

LOADBALANCER-6

Not all required fields are present for the embedded SSL certificate

LOADBALANCER-7

A link to the SSL certificate or the embedded form must be used, but not both at the same time.

LOADBALANCER-8

The requested load balancer address does not exist

LOADBALANCER-9

There is already one health check with the same path and protocol in the load balancer

LOADBALANCER-10

The requested health check does not exist in the load balancer

LOADBALANCER-11

Selected private networks are not in the same virtual datacenter

LOADBALANCER-12

Selected firewalls are not in the same virtual datacenter

LOADBALANCER-13

Certificate cannot be stored in the provider. Ensure the load balancer is properly created

LOADBALANCER-14

Address cannot be selected in the provider. Ensure the load balancer is properly created

LOADBALANCER-15

Virtual machines cannot be attached to load balancer in the provider. Ensure the load balancer is properly created

LOADBALANCER-18

The requested SSL certificate does not exist

LOADBALANCER-19

VLAN not found during load balancer import

LOADBALANCER-20

Load balancer has VLAN networks but cannot select the virtual datacenter

LOADBALANCER-21

Firewall not found while importing load balancer; try to synchronize firewalls before load balancers

LOADBALANCER-22

Cannot embed RoutingRules, HealthChecks or LoadBalancerAddresses during modify, use sub-resources instead

LOADBALANCER-23

Create firewall policies in the provider before assigning them to the load balancer

LOADBALANCER-24

Load balancer requires at least one routing rule

LOADBALANCER-25

Create VLAN networks (or elastic IPs) in the provider before assigning them to the load balancer

LOADBALANCER-26

Cannot modify load balancer address because it is not associated with a load balancer or is managed by the provider

LOADBALANCER-27

The load balancer is being used by virtual machines and cannot be deleted

LOADBALANCER-28

Plugin does not support the specified network type, check LOADBALANCER_SUBNETS_TYPE constraint

LOADBALANCER-29

Plugin does not support the association of a load balancer with a virtual datacenter and it does not support the use of private networks with load balancers

LOADBALANCER5-16

Given virtual machines are not compatible with the load balancer

LOADBALANCER5-17

An unexpected error occurred while assigning virtual machines to load balancer

Locations

 

LOCATION-1

The location link is required

LOCATION-2

The location link is not valid

LOCATION-3

The given provider type is not compatible with the given location

LOCATION-4

The location does not exist

LOCATION-5

The given virtual datacenter is not compatible with the given location

Machine or hypervisor

 

HYPERVISOR-1

Invalid hypervisor IP. A hypervisor with that IP already exists

HYPERVISOR-2

Invalid hypervisor service IP. A hypervisor with that service IP already exists

HYPERVISOR-3

Invalid hypervisor endpoint information. A hypervisor with that connection already exists

HYPERVISOR_TYPE-0

The requested hypervisor type is invalid

HYPERVISOR_TYPE-1

Missing hypervisor type link

HYPERVISOR_TYPE-2

Invalid hypervisor type link

MACHINE-0

The requested machine does not exist

MACHINE-1

The machine is not assigned to the datacenter or rack

MACHINE-2

Machine definition should have at least one datastore created and enabled

MACHINE-4

Invalid virtual switch name

MACHINE-5

The requested state change is not valid

MACHINE-6

The requested machine could not be contacted

MACHINE-7

Machine cannot be removed because it is blocked by the high availability engine. Manually re-enable to return it to managed state then try again.

MACHINE-8

Invalid IPMI configuration

MACHINE-9

Invalid IP range

MACHINE-10

The IQN of the target physical machine is not set

MACHINE-11

The machine is in a managed rack and its name cannot be changed.

MACHINE-12

The requested machine cannot be reserved because another enterprise has already reserved it.

MACHINE-13

The machine with ID '%d' cannot be released because it is not reserved

MACHINE-14

The requested machine is already reserved.

MACHINE-15

There are no virtual machines on the physical machine

MACHINE-16

The machine '%s' cannot be reserved because it contains virtual machines deployed by another enterprise.

MACHINE-17

The state of the physical machine does not allow retrieval of virtual machines

MACHINE-18

Invalid link to network service type

MACHINE-19

Duplicate network service type for network interfaces

MACHINE-20

Cannot update machine: network service type of network interface cannot be changed when it is in use

MACHINE-21

At least one network interface must have a network service type assigned

MACHINE-22

Cannot update machine '%s (%s)': cannot change network service type of network interface '%s' when it is in use

MACHINE-23

The network service types assigned to the host NICs and the target virtual datacenter are different

MACHINE-24

The state of the physical machine does not allow capture of virtual machines

MACHINE-25

Duplicate network interface name

MACHINE-26

Invalid entity: 'virtualSwitch' element not found

MACHINE-27

The requested plugin does not provide any host discovery method

MACHINE-28

There are virtual machines that are currently not synchronized and it is impossible to recover their current vNICs

MACHINE-29

Machines in the same datacenter must have a unique name

MACHINE-30

Cannot delete the physical machine because it contains protected virtual machines

MACHINE-31

Cannot retrieve virtual machines. A VM with name '%s' already exists in another datacenter.

Mail

 

MAIL-0

No recipient has been selected, please indicate owner and/or enterprise admin

MAIL-1

Sender does not have email address set

MAIL-2

No recipient has been found

MAIL-3

Bad Internet address error

MAIL-4

Bad JNDI Error

MAIL-5

Message body text is required

Monitoring and metrics

 

MONITORING-1

Metric not found

MONITORING-2

The metric name is required

MONITORING-3

Illegal time range for a statistic query

MONITORING-4

The supplied relative time contains years or months

MONITORING-6

The supplied relative start time is invalid

MONITORING-8

The minimum granularity is 60 seconds

MONITORING-9

The supplied metric already exists

MONITORING-10

Unknown monitoring level

MONITORING-11

The name of the monitoring level is required

MONITORING-12

Cannot collect metrics for imported virtual machines

MONITORING-13

Alarm not found

MONITORING-14

The given alarm already exists

MONITORING-15

The given alarm DTO is null

MONITORING-16

The alarm name is required

MONITORING-17

The alarm formula is required

MONITORING-18

The alarm statistic is required

MONITORING-21

The supplied formula does not exist

MONITORING-22

The supplied statistic does not exist

MONITORING-23

Alert not found

MONITORING-24

The supplied alert already exists

MONITORING-25

The supplied alert DTO is null

MONITORING-26

The alert name is required

MONITORING-27

The supplied collection of alarms is null or empty

MONITORING-28

Could not connect to the watchtower service

MONITORING-29

Bad request to watchtower server

MONITORING-30

Something has gone wrong on the watchtower server

MONITORING-31

Monitoring is not enabled, all monitoring related operations are unavailable

MONITORING-32

Malformed alarm link

MONITORING-33

Hypervisor metrics are not available for public cloud providers

MONITORING-34

Cannot retrieve hypervisor metrics of virtual machines that are not deployed

MONITORING-35

The hypervisor plugin does not support hypervisor metrics collection

MONITORING-37

Unable to create an alarm for a virtual machine cloned by a scaling group

MONITORING-38

The relative start time must be shorter than configured in 'abiquo.monitoring.max.statistic.period.days' property

MONITORING-39

Absolute or relative queries are allowed but not both

MONITORING-40

The alarm time range must be >= 1

MONITORING-41

The datapoints limit must be >= 1

MONITORING-42

Not allowed to get statistics of a composite metric

MONITORING-46

Not allowed to get composite statistics of a regular metric

MONITORING-47

Unable to create alarm with unknown metric dimensions

MONITORING-48

Not allowed to update metadata of built-in metrics

MONITORING-74

Not allowed to put datapoints to built-in metrics

Move VM

 

MOVE-VM-0

Not allowed to move a virtual machine that belongs to a scaling group

MOVE-VM-1

Target virtual appliance link is required

MOVE-VM-2

Target network configuration link is required

MOVE-VM-3

Unknown link rel, only expecting ''virtualappliance'', ''network_configuration'', ''firewall'', ''loadbalancer'' and ''nicX''

MOVE-VM-4

Can move virtual machines that are deployed only

MOVE-VM-5

Not allowed to move a virtual machine with volumes

MOVE-VM-6

Not allowed to move a virtual machine running in a public cloud region

MOVE-VM-7

Not allowed to move a virtual machine to a different datacenter

MOVE-VM-8

Not allowed to move a virtual machine to a different hypervisor type

MOVE-VM-9

Not allowed to move a virtual machine to another enterprise

MOVE-VM-10

Not allowed to move a virtual machine to a different device

MOVE-VM-11

To move a virtual machine within the same virtual datacenter, use the virtual appliance move endpoint

MOVE-VM-12

Not allowed to move a virtual machine with NAT rules

NAT IP

 

NAT-IP-0

The NAT IP was not found

NAT-IP-1

Expecting a link to virtualdatacenter to assign

NAT-IP-3

Cannot delete a NAT IP with rules

NAT-IP-4

Cannot make a NAT IP unavailable while it has rules

NAT-IP-5

There is no IP available in the NAT network

NAT-IP-6

There is no IP available in any NAT network

NAT-IP-7

Invalid NAT IP link

NAT-IP-8

Cannot use a NAT IP not assigned to the virtualDatacenter

NAT-IP-9

NAT IP does not belong to NAT network CIDR

NAT-IP-10

NAT IP already exists

NAT-IP-11

NAT IP is not attached

NAT-IP-12

Cannot delete a NAT IP while it is attached to a virtual datacenter

NAT-IP-13

Cannot use NAT IP: it is already attached to another virtual datacenter, unavailable, or in quarantine

NAT-IP-14

Cannot delete the default NAT IP of a VDC

NAT-IP-15

To change the default SNAT IP, assign another NAT IP as the default for SNAT

NAT-IP-16

Invalid NAT IP link type. Plugin doesn't allow the creation of a rule with this kind of IP.

NAT-IP-17

NAT IP is already in use in the provider. Will make it unavailable, please try again.

NAT-IP-18

Cannot specify default SNAT IP when creating the virtual datacenter in this provider.

NAT network

 

NAT-NET-1

The NAT network was not found

NAT-NET-2

NAT not supported in the device

NAT-NET-3

NAT network requires a device link

NAT-NET-4

Cannot edit or delete NAT with created IPs

NAT-NET-5

Invalid format for network CIDR

NAT rule

 

NAT-RULE-0

The NAT rule was not found

NAT-RULE-1

An ''original'' link to a NAT IP is required

NAT-RULE-2

A ''translated'' link to a private IP is required

NAT-RULE-3

Original port already in use for the specified NAT IP

NAT-RULE-5

Load balancer address cannot be private to use a NAT IP

NAT-RULE-6

Cannot modify load balancer address when it is in use in NAT rules

NAT-RULE-7

Cannot delete an IP with associated NAT rules

NAT-RULE-8

Cannot clone NAT rule because all the ports are in use

NAT-RULE-9

Cannot clone NAT rule because there is no available NAT IP in the same network and virtual datacenter with all the ports available

NAT-RULE-10

Cannot create NAT rule: it should set ''originalPort'' and ''translatedPort'' or use all ports

NAT-RULE-11

Cannot create NAT rule using a private IP that is not attached to the virtual machine

NAT-RULE-12

Cannot create NAT rule because the NAT IP is in quarantine

NAT-RULE-13

Unsupported NAT protocol

NAT-RULE-14

Cannot specify multiple SNAT rules for the same private IP

NAT-RULE-15

Cannot specify ports or protocol in SNAT rules

Network

 

NET-0

Invalid network configuration for the virtual datacenter

NET-8

This network has no IP addresses

NET-9

Parameter IPFrom is greater than IPTo

NET-10

Parameter IPFrom is invalid

NET-11

Parameter IPTo is invalid

NET-12

Invalid link for configuring the virtual machine network

NET-13

Invalid virtual datacenter identifier in the configuration link

NET-14

Invalid virtual appliance identifier in the configuration link

NET-15

Invalid virtual machine identifier in the configuration link

NET-16

Invalid configuration identifier in the configuration link. Configuration ID does not belong to any VLAN configuration used by this virtual machine

NET-17

Non existent network configuration

Network device

 

NETDEVICE-1

The device does not exist

NETDEVICE-2

Devices managed by the provider are immutable

NETDEVICE-3

There is another default device

NETDEVICE-4

Cannot change enterprise/delete because the device is in use

NETDEVICE-5

The entity is associated with a device that is not configured in the current virtual datacenter

Network service type

 

NST-0

The name of the network service type must be supplied

NST-1

The name of the network service type already exists

NST-2

The requested network service type does not exist

NST-3

You can edit the current default network service type for a datacenter but you cannot delete it.

NST-4

A datacenter requires at least one network service type and there is only one left.

NST-5

Invalid network service type identifier in the enterprise link

NST-6

Missing network service type link

NST-7

The network service type and the excluded from firewalls flag cannot be changed because there are virtual machines using IPs in this VLAN

NST-8

Network service type cannot be deleted because it is assigned to physical machine(s)

NST-9

Network service type cannot be deleted because it is assigned to VLAN(s)

NST-10

Invalid datacenter identifier in the network service type link

NST-11

Invalid network service type for '%s'. This distributed network interface must have an associated network service type. Conflict with machine '%s (%s)'

NST-12

Conflict error trying to assign network service '%s' to network interface '%s'. Conflict with machine '%s (%s)'

Node collector

 

NC-0

The requested IP does not exist

NC-1

Missing IP query parameter

NC-2

Bad credentials attempting to retrieve the list of physical machines from rack

NC-3

Bad credentials attempting to retrieve the machine

NC-4

There is a machine running at the given IP but no hypervisor is responding

NC-5

There is no machine running at the given IP

NC-6

Unexpected exception building the request to discovery manager

NC-7

The discovery manager is currently not available

NC-8

The requested virtual machine was not found on the remote hypervisor

NC-9

The requested host is not managed

NC-10

The IP format is invalid

NC-11

Access is denied, please check whether the [domain-username-password] are correct. Also, if not already done please check the GETTING STARTED and FAQ sections in readme.htm. They provide information on how to correctly configure the Windows machine for DCOM access, so as to avoid such exceptions.

OVF package

 

OVF-PACKAGE-0

The requested OVF package does not exist

OVF-PACKAGE-1

The requested OVF package list does not exist

OVF-PACKAGE-2

Cannot return the template definition

OVF-PACKAGE-3

Cannot find the RepositorySpace

OVF-PACKAGE-4

The requested RepositorySpace does not exist

OVF-PACKAGE-5

The URL of the disk format type is invalid

OVF-PACKAGE-6

The OVF URL in the template definition is invalid

OVF package list

 

OVF-PACKAGE-LIST-0

OVF Package list name already exists

OVF-PACKAGE-LIST-1

The template definition list is not associated with a URL (ovfindex.xml), so it cannot be refreshed from the source

OVF-PACKAGE-LIST-2

OVF Package list name is required

Parsing links

 

LNK-0

Invalid link. Check documentation

LNK-1

Invalid number of links: this resource only accepts a single link

LNK-2

Virtual machine template link with rel 'virtualmachinetemplate' is mandatory

LNK-3

Virtual machine template link is invalid

LNK-4

Region link not found or invalid

Persistent

 

CONSTR-InstanceName

Missing instance name

CONSTR-LENGTH-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-LENGTH-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

CONSTR-LENGTH-VOL-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-LENGTH-VOL-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

CONSTR-SNAPSHOT-LENGTH-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-SNAPSHOT-LENGTH-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

PERSISTENT-1

The virtual machine template is already persistent

PERSISTENT-2

A RAW format conversion does not exist for the virtual machine template but is required to make it persistent

PERSISTENT-3

No name given for the new persistent template

PERSISTENT-4

No tier or volume for storing the persistent virtual machine template was found in the request but one of these is required

PERSISTENT-5

There are no pools available in at least one of the selected tiers

PERSISTENT-6

An error occurred while creating the volume. Please contact your administrator

PERSISTENT-7

Another virtual machine is already using the persistent virtual machine template.

PERSISTENT-8

No virtual machine template found to persist

PERSISTENT-9

Invalid tier link

PERSISTENT-10

Invalid volume link

PERSISTENT-11

Invalid virtual datacenter link

PERSISTENT-12

No virtual datacenter found for the persistent virtual machine

PERSISTENT-13

Unable to create the initiator mapping for the volume.

PERSISTENT-14

The virtual datacenter does not belong to the correct enterprise

PERSISTENT-15

Invalid disk link

PERSISTENT-16

Defined sequence repeated

PERSISTENT-17

Disk misses for defined sequence

PERSISTENT-18

Destination disk sequences must match with origin disk sequences

PERSISTENT-19

Cannot request creation of a persistent disk from an empty disk

PERSISTENT-20

Cannot request creation of a persistent disk from an ISO disk

Pricing credentials

 

PRICING-CREDS-1

The requested pricing credentials do not exist

PRICING-CREDS-2

The supplied pricing credentials are already in use.

PRICING-CREDS-3

The credentials require a provider attribute

PRICING-CREDS-4

The credentials require an access key attribute

PRICING-CREDS-5

Cannot update the provider of existing pricing credentials

PRICING-CREDS-6

A link to a hypervisortype or publiccloudregion is required

PRICING-CREDS-7

Cannot use pricing credentials in a dynamic region plugin

Pricing template

 

PRICINGTEMPLATE-0

Missing currency parameter

PRICINGTEMPLATE-1

Missing enterprise parameter

PRICINGTEMPLATE-2

Duplicate name for pricing template

PRICINGTEMPLATE-3

The requested pricing template does not exist

PRICINGTEMPLATE-4

Cannot delete a pricing template that is associated with an enterprise

PRICINGTEMPLATE-5

The smallest charging period is DAY

PRICINGTEMPLATE-6

Pricing template name cannot be empty

PRICINGTEMPLATE-8

Charging period values should be between 2 and 6

PRICINGTEMPLATE-9

Check minimum charge value is not null or wrong type

PRICINGTEMPLATE-10

Minimum charge values should be between 0 and 6

PRICINGTEMPLATE-11

CPU can have prices for on/off or a generic CPU price

PRICINGTEMPLATE-12

RAM can have prices for on/off or a generic RAM price

Privilege

 

PRIVILEGE-0

The requested privilege does not exist

PRIVILEGE-1

The user does not have the requested privilege

Provider limit

 

PROVIDER-LIMITS-36

The provider limits already exist

PROVIDER-LIMITS-37

An endpoint is only allowed for a dynamic region

Public cloud

 

PUBLIC-1

The requested credentials do not exist

PUBLIC-2

Unable to establish a connection to the endpoint of the public cloud region

PUBLIC-3

The requested provider already has credentials assigned.

PUBLIC-4

The requested provider is not supported.

PUBLIC-5

The requested operation is not supported in a public cloud region

PUBLIC-6

The requested operation is not supported in a datacenter

PUBLIC-7

The provider field of public cloud credentials cannot be modified

PUBLIC-8

Missing public cloud region link

PUBLIC-9

Plugin not loaded or not a cloud provider

PUBLIC-10

The enterprise does not have credentials for this provider

PUBLIC-11

The access ID and secret key are required to validate the credentials

PUBLIC-12

The given credentials are not valid for this region

PUBLIC-13

The given credentials could not be validated. At least one public cloud region of the same provider type must be allowed for this enterprise in order to verify the credentials

PUBLIC-14

The supplied public cloud credentials are already in use.

PUBLIC-15

A public cloud region is required to create a public cloud credential for this provider type

PUBLIC-16

A link to a public cloud region or a provider type must be provided

PUBLIC-17

The public cloud region of a public cloud credential cannot be modified

Public cloud region

 

PUBLICREGION-1

The enterprise link is required

PUBLICREGION-2

The name is required

PUBLICREGION-5

The region is already used by another public cloud region

PUBLICREGION-6

The name is already used by another public cloud region

PUBLICREGION-7

The remote services for a public cloud region must be: Virtualization Manager, Monitor Manager, Plugin Manager, Remote Access Manager

PUBLICREGION-8

The requested public cloud region does not exist

PUBLICREGION-9

The requested public cloud region is invalid for the given public cloud provider

PUBLICREGION-10

Cannot obtain the endpoint of the given provider type and region.

PUBLICREGION-11

Cannot delete a public cloud region that is being used by some virtual datacenters

PUBLICREGION-12

The region of a public cloud region cannot be modified

PUBLICREGION-13

The provider type of a public cloud region cannot be modified

PUBLICREGION-14

The requested public cloud region does not support storage limits

PUBLICREGION-15

The requested public cloud region does not support repository limits

PUBLICREGION-16

The endpoint of a public cloud region cannot be modified

PUBLICREGION-17

The given provider ID belongs to a virtual datacenter of another enterprise

PUBLICREGION-18

The given provider ID does not belong to any remote virtual datacenter

PUBLICREGION-19

VDC synchronization is not possible for providers not implementing VPC. Synchronize region instead

PUBLICREGION-20

Public cloud region synchronize is not possible for providers implementing VPC. Synchronize each VDC individually instead

PUBLICREGION-21

Cannot synchronize the virtual machines '%s' and '%s' because they already exist in different virtual datacenters but are related by a firewall/load balancer

PUBLICREGION-22

Cannot synchronize the firewall policies '%s' and '%s' because they already exist in different virtual datacenters but are related by a virtual machine

PUBLICREGION-23

Cannot synchronize the load balancers '%s' and '%s' because they already exist in different virtual datacenters but are related by a virtual machine

PUBLICREGION-24

Cannot determine the target virtual datacenter of synchronize because of dependencies between virtual machines and firewalls of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-25

Cannot determine the target virtual datacenter of synchronize because of dependencies between virtual machines and load balancers of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-26

Cannot determine the target virtual datacenter of synchronize because of dependencies between firewalls and load balancers of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-27

Cannot determine the target virtual datacenter of synchronize because of dependencies between virtual machines and networks of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-28

Cannot determine the target virtual datacenter of synchronize because of dependencies between firewalls and networks of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-29

Cannot determine the target virtual datacenter of synchronize because of dependencies between load balancers and networks of virtual datacenters with ids: '%s' and '%s'

PUBLICREGION-30

Single resource synchronization is not supported, use the full public cloud region synchronization

PUBLICREGION-31

Cannot synchronize the networks '%s' and '%s' because they already exist in different virtual datacenters but are related by a virtual machine/load balancer

Query paging standard errors

 

QUERY-0

Invalid 'by' parameter

QUERY-1

Invalid 'type' parameter. Only 'EXTERNAL', 'UNMANAGED' or 'PUBLIC' allowed

QUERY-2

Invalid range: 'startwith' parameter must be less than 'limit' parameter

RabbitMQ

 

RABBITMQ-0

Failed connection to RabbitMQ

Rack

 

RACK-0

The rack is not assigned to the datacenter

RACK-3

There is already a rack with that name in this datacenter

RACK-4

This rack does not exist

RACK-5

Machines in this rack cannot be discovered

RACK-7

There is already a managed rack with this IP defined in the same datacenter

RACK-9

Cannot remove this rack because there are some virtual machines deployed on it

RACK-11

This rack contains deployed virtual machines

RACK-12

The new VLAN tag range is not valid because some VLAN tags on the rack are outside of the new range

RACK-13

The new VLAN tag range does not contain any available tags, check ''vlanIdMin'', ''vlanIdMax'' and ''vlansIdAvoided''

RACK-14

Missing link to rack

Redis

 

REDIS-0

Failed connection to Redis

Region

 

REGION-0

Missing region link

REGION-1

Invalid region link

REGION-2

Region not found in the provider plugin

Remote service

 

RS-0

The remote service is not assigned to the datacenter

RS-1

Wrong remote service type

RS-2

The remote service does not exist

RS-3

The remote service URL already exists and cannot be duplicated

RS-4

Malformed remote service URL

RS-5

This datacenter already has a storage pool assigned

RS-6

A remote service of that type with the same UUID is already in use

RS-7

Failed connection to the remote service

RS-8

This remote service is not available to be checked

RS-9

Cannot delete a storage manager with storage pools associated

RS-10

Cannot delete a DHCP Service. There are virtual machines deployed.

RS-11

The URL supplied is invalid

RS-12

The URI of the DHCP remote service is invalid

RS-13

The remote service does not have the abiquo.datacenter.id property set

RS-14

The remote service is configured with a different datacenter UUID, please adjust the abiquo.datacenter.id property in the remote service.

RS-15

A port must be defined in the URI

RS-16

The remote service indicated cannot be used in a remote service client pool

RS-17

An unexpected error occurred while getting the remote service client from the client pool

RS-18

Remote service exception: the remote service log contains more details

RS-19

Cannot delete a virtual system monitor service. There are virtual machines deployed.

RS-20

The URI parameter is required

RS-21

Remote service UUID already used

RS-22

The URI of the DHCPv6 remote service is invalid

RS-23

The remote service is not assigned to the public cloud region

RS-24

The type parameter is required

RS-25

Remote service in use

RS-26

The requested remote service does not exist

RS-27

A location is required to create the remote service, and only one is allowed

RS-28

Remote service type not allowed to be used in a datacenter

RS-29

Remote service type not allowed to be used in a public cloud region

RS-30

The location already has a remote service of the same type assigned

RS-31

The type cannot be modified

RS-32

More than one remote service of the same type is not allowed in a datacenter

RS-33

Cannot release the Monitor Manager because the datacenter has monitors

RS-35

Cannot detach not reusable remote service

RS-AM-0

The repository exported by the current appliance manager is being used in another datacenter

RS-AM-1

The current repository holds virtual machine templates being used in some virtual appliances, so it is not possible to remove this remote service. You can replace the appliance manager with another one but only if the same repository is used.

Repository

 

REPO-1

Cannot request ''usage'' or ''refresh'' of a public cloud repository

Role

 

ROLE-0

The requested role does not exist

ROLE-1

The requested role cannot be modified

ROLE-2

Missing privilege parameter

ROLE-3

The requested role is blocked. It cannot be deleted

ROLE-4

Cannot delete a role with a user associated

ROLE-5

Cannot delete a role with a RoleLdap associated

ROLE-6

Cannot create a role with the same name as an existing role for the same enterprise or with the same name as an existing global role

ROLE-7

Cannot create a global role with the same name as an existing role

ROLE-8

Not enough privileges to manage this role

ROLE-9

Property name must not be blank

ROLE-10

Cannot modify the enterprise of this role because it is currently assigned to users of that enterprise.

ROLE-11

Invalid role link

ROLE-12

Cannot assign the same user to different roles.

ROLE-13

Cannot delete a role used as a virtual datacenter role

ROLE-14

Cannot delete the default role of an allowed location

ROLE-15

Role name cannot exceed 40 chars

Role LDAP

 

ROLELDAP-1

There are multiple entries for the requested roleLdap

Scaling group

 

SCALING-GROUP-1

The provided scaling group is null

SCALING-GROUP-2

A virtual appliance is needed to create a scaling group

SCALING-GROUP-3

A master virtual machine is needed to create a scaling group

SCALING-GROUP-4

Name is required for a scaling group

SCALING-GROUP-5

The scaling group cooldown seconds must be > 0

SCALING-GROUP-6

The scaling group min size must be >= 0

SCALING-GROUP-7

The scaling group max size must be greater than min size

SCALING-GROUP-8

Empty scaling group 'out' rules

SCALING-GROUP-9

Empty scaling group 'in' rules

SCALING-GROUP-10

Overlapped time ranges in the provided scaling rules

SCALING-GROUP-11

Only one default rule is allowed

SCALING-GROUP-12

The requested scaling group does not exist

SCALING-GROUP-13

Unable to enable or disable maintenance mode because the scaling group contains locked virtual machine(s)

SCALING-GROUP-14

The scaling group is in maintenance mode already

SCALING-GROUP-15

The scaling group is not in maintenance mode

SCALING-GROUP-16

The scaling group must be in maintenance mode in order to apply the requested operation

SCALING-GROUP-17

The virtual machine is already assigned to another scaling group

SCALING-GROUP-18

Unable to scale out if the scaling group is in maintenance mode

SCALING-GROUP-19

Unable to scale in if the scaling group is in maintenance mode

SCALING-GROUP-20

A master virtual machine cannot be deleted or released

SCALING-GROUP-21

The scaling group cannot be in maintenance mode in order to apply the requested operation

SCALING-GROUP-22

License not found to manage scaling groups

SCALING-GROUP-23

You are trying to delete a scaling group associated to one or more action plans. If you delete the scaling group, the related actions plans will be affected. To proceed with the delete, please try again with the 'force' parameter set to 'true'.

Scaling rule

 

SCALING-RULE-1

The provided scaling rule is null

SCALING-RULE-2

The scaling rule start time must be before the end time

SCALING-RULE-3

The scaling rule cooldown seconds must be > 0

SCALING-RULE-4

The scaling rule number of instances must be > 0

SCALING-RULE-5

The scaling rule start and end time must be provided

Schedule

 

SCHEDULE-1

The supplied interval DTO is null

SCHEDULE-2

The supplied cron DTO is null

SCHEDULE-3

Unable to parse cron expression

SCHEDULE-4

Missing field 'seconds' in cron expression

SCHEDULE-5

Missing field 'minutes' in cron expression

SCHEDULE-6

Missing field 'hours' in cron expression

SCHEDULE-7

Missing field 'day of month' or 'day_of_week' in cron expression

SCHEDULE-8

Missing field 'month' in cron expression

SCHEDULE-9

The repeat interval in seconds must be > 0

SCHEDULE-10

The end date must be after the start date

SCHEDULE-11

The repeat count must be >= 0

SCHEDULE-12

The end date must be in the future

Scope

 

SCOPE-0

Duplicate name for scope

SCOPE-1

The requested scope does not exist

SCOPE-2

Cannot delete the default scope

SCOPE-3

Cannot modify the default scope

SCOPE-4

The role supplied in user creation does not have this enterprise visible in its scope

SCOPE-5

Cannot remove the scope because there are roles associated with it

SCOPE-6

Cannot associate role with requested scope, because there are users with enterprises not included in this scope.

SCOPE-7

Scope invalid link

SCOPE-8

Cannot modify the scope because the enterprise to be removed from scope is the enterprise of a user with this scope assigned

SCOPE-9

Cannot remove the scope because there are pricing templates associated with it

SCOPE-10

Cannot modify the scope to remove the enterprise. The virtual machine template is being used by virtual machines in this enterprise.

SCOPE-11

Cannot remove the scope. The virtual machine template is being used by virtual machines in other enterprises.

SCOPE-12

Cannot delete the scope because it is the default for an enterprise.

SCOPE-13

Cannot modify the scope to remove the enterprise. This scope is the default for the enterprise to be removed.

SCOPE-14

Cannot associate the enterprise with the requested scope because the enterprise is not included in the scope.

SCOPE-15

User cannot be created because their enterprise is not visible in the selected scope.

SCOPE-16

User cannot be modified because their enterprise is not visible in the selected scope.

SCOPE-17

Cannot remove the scope because there are users associated with it

SCOPE-18

Invalid parent scope. You cannot set a scope as its own parent, and you cannot set a descendant's scope as a parent.

SCOPE-19

Cannot remove the scope because it is a parent scope.

SCOPE-20

Cannot add a parent to an unlimited scope

SCOPE-21

Only users with an unlimited scope are allowed to make a scope unlimited

Statistics

 

NODECOLLECTOR-1

The remote service has raised an error.

STATS-0

No statistical data found

STATS-1

No statistical data found for the requested datacenter

STATS-2

No statistical data found for the requested enterprise in this datacenter

STATS-3

No statistical data found for the requested enterprise

Storage devices

 

DEVICE-0

The requested device does not exist

DEVICE-1

Duplicate storage device

DEVICE-2

Plugin does not specify default management or service. This must be included in the request

Storage pool

 

SP-1

Missing IQN query parameter

SP-2

The ID of the storage pool and the ID of the object supplied must be the same

SP-3

The requested storage pool does not exist

SP-4

There was an unexpected error while modifying the storage pool

SP-5

Could not get the storage pools from the target device

SP-6

Could not get the requested storage pool from the target device

SP-7

Cannot edit or delete the storage pool because it contains volumes

SP-8

Duplicate storage pool

SP-9

Tier is disabled

SP-10

Missing storage pool parameter

SP-11

The datacenter parameter was not found in the storage pool link

SP-12

The storage device parameter was not found in the storage pool link

SP-13

Missing storage pool link

SP-14

Access to this tier is restricted for your enterprise

SP-15

The storage pool cannot be added because it is the NFS repository of the Appliance Manager

Storage system manager

 

SSM-1

Could not get the storage pools on the target storage device

SSM-2

Could not get the given storage pool on the target storage device

SSM-3

Could not get the volumes in the given storage pool

SSM-4

Could not get the given volume in the given storage pool

SSM-5

Could not create the volume on the target storage device

SSM-6

Could not delete the volume from the target storage device

SSM-7

Could not update the volume on the target storage device

SSM-8

Could not add the given iSCSI initiator on the target storage device

SSM-9

Could not remove the given iSCSI initiator from the target storage device

SSM-10

Could not get the metadata of the given storage type

System properties

 

SYSPROP-0

The requested system property does not exist

SYSPROP-1

There is already a system property with that name

Tasks

 

TASK-1

The requested task does not exist

TASK-2

The task is not in the appropriate state

Tiers

 

TIER-0

The requested storage tier does not exist

TIER-1

Tier embedded in StoragePool cannot be null

TIER-2

Missing link to storage tier

TIER-3

Missing storage tier parameter

TIER-4

Datacenter parameter in storage tier link not found

TIER-5

The storage tier is not in the datacenter where you are trying to create the storage pool

TIER-6

Cannot disable a tier with associated storage pools

TIER-7

The requested storage tier is disabled

TIER-8

Location parameter was not found in storage tier link

TIER-9

The location link of the storage tier does not match the location of the virtual datacenter supplied

TIER-10

The supplied storage allocation policy is not of a valid type

Two factor authentication

 

2FA-0

Unexpected error generating the two factor verification code

2FA-1

Two-factor authentication is already enabled for the current user

2FA-2

The given two-factor authentication provider is not supported

2FA-3

The platform is not configured to use two factor authentication

2FA-4

Cannot enable two-factor authentication for another user

2FA-5

Cannot enable two-factor authentication. Email is required.

2FA-6

Cannot disable two-factor authentication for another user

User

 

USER 9

The user cannot delete his own user account

USER 10

Cannot change the user nick (username)

USER 11

The user password is required

USER 12

The user name is required

USER 13

The user nick (username) is required

USER 14

Your enterprise does not allow you to manage this virtual datacenter

USER-0

The user is not assigned to the enterprise

USER-1

Missing link to the role

USER-2

Missing roles parameter

USER-3

The requested user does not exist

USER-4

Duplicate username for user

USER-5

The email is not valid

USER-6

Users can only be created in Abiquo auth mode

USER-7

User's role can only be modified in Abiquo auth mode

USER-8

In LDAP mode cannot modify user's enterprise

USER-15

The supplied session does not exist

USER-16

The role of the user is locked. Only users with the same role can delete users with locked roles

USER-17

Cannot move user with local role to another enterprise

USER-18

Cannot assign role to user because the user's enterprise is not visible in the user's scope

USER-19

Your scope is not allowed to use this scope.

USER-20

User must have a role from their enterprise or a global role

USER-21

The field surname is required

USER-22

The role of the user is locked. Only users with the same role can modify users with locked roles

USER-23

The requested application does not exist

USER-24

The virtual datacenter does not belong to the user's enterprise

USER-25

Cannot modify the user's role because this is the last user with the cloud admin role

USER-26

The user email is required

USER-27

The user link is invalid

User password

 

PSW-1

Passwords must contain characters from three of the following five categories: -Uppercase characters of European languages (A through Z, with diacritic marks, Greek and Cyrillic characters) -Lowercase characters of European languages (a through z, sharp-s, with diacritic marks, Greek and Cyrillic characters) -Base 10 digits (0 through 9) -Non-alphanumeric characters: ~!@#$%^&*_-+=\

PSW-2

Password must be at least %s characters in length

PSW-3

Cannot repeat any of the last %s passwords

PSW-5

Password recovery is not allowed

PSW-6

Your words did not match. Please try submitting again.

PSW-7

Please enter reCAPTCHA.

PSW-8

Missing reCAPTCHA private key in abiquo.properties

PSW-9

User must change password on first login.

PSW-10

Password must not contain the user's entire Username or entire First Name or entire Last Name. These checks are not case sensitive.

PSW-11

Fail reCAPTCHA validation. Please try submitting again.

PSW-12

Missing reCAPTCHA public key in the client-config-custom.json

PSW-48

Password cannot be changed until %s days have passed since the last change

VLAN

 

VLAN-0

You have reached the maximum VLANs that you can create in this virtual datacenter

VLAN-1

Cannot create two VLANs with the same name in a virtual datacenter

VLAN-2

Cannot use any address outside the private range

VLAN-3

For performance reasons, the platform does not allow you to create large networks

VLAN-4

This network can have a netmask of between 30 and 22. Use a value above 22

VLAN-5

This network can have a netmask of between 30 and 22. Use a value below 30

VLAN-6

The network does not match the mask. Check your request

VLAN-7

Gateway address out of range

VLAN-8

The requested virtual network does not exist

VLAN-9

There must be at least one default VLAN in each virtual datacenter

VLAN-10

Attributes 'address', 'mask' and 'tag' cannot be changed when editing a private VLAN.

VLAN-11

The VLAN cannot be deleted because it is the default VLAN of this enterprise

VLAN-12

Cannot delete a VLAN with IPs used by virtual machines

VLAN-13

Field 'tag' is mandatory when you create public VLANs

VLAN-14

Cannot delete a VLAN with IPs purchased by enterprises

VLAN-15

Cannot create two VLANs with the same name in a datacenter

VLAN-16

VLAN tag out of limits

VLAN-17

The requested IP object does not exist

VLAN-18

Only 'quarantine' and 'available' attributes can be modified when editing an IP

VLAN-19

Attributes 'address' and 'mask' cannot be changed when editing a public, external or unmanaged network

VLAN-20

The IP does not exist or is not available

VLAN-21

The IP does not exist or is not purchased

VLAN-22

This IP address is currently used by a virtual machine. It cannot be released

VLAN-23

Invalid link to private IP address to create NIC

VLAN-24

Invalid virtual datacenter identifier in the IP link

VLAN-25

The IP address is already used by another virtual machine

VLAN-26

Invalid link to public IP address to create NIC

VLAN-27

Cannot release this IP from the virtual machine because the configured default gateway is in the same subnet. Please choose a different gateway before removing this IP

VLAN-28

The NIC does not exist

VLAN-29

Every virtual machine should have at least one NIC

VLAN-30

Invalid link to reorder NICs on a virtual machine

VLAN-31

Invalid link values (virtual datacenter, virtual appliance and/or virtual machine identifiers) for reordering NICs on a virtual machine

VLAN-32

Cannot set the IP as 'not available' while it is purchased by an enterprise

VLAN-33

Cannot release a public IP while it is assigned to a virtual machine

VLAN-34

The configuration does not exist

VLAN-35

Cannot assign the external VLAN as default because it is not assigned to any enterprise

VLAN-36

Unable to find default VLAN in virtual datacenter. Inconsistent state in database

VLAN-37

Invalid enterprise identifier in the enterprise link

VLAN-38

The IP address is already assigned to a virtual datacenter

VLAN-39

Cannot delete a VLAN with IPs assigned to a virtual datacenter

VLAN-40

The requested external VLAN does not belong to the same datacenter as the virtual datacenter

VLAN-41

IP format is invalid

VLAN-42

The IP does not exist

VLAN-43

This is the default VLAN for the virtual datacenter and it cannot be deleted

VLAN-44

The external VLAN belongs to another enterprise

VLAN-45

The IP address is not available to be used by a virtual machine

VLAN-46

The requested IP object does not exist

VLAN-47

Cannot change enterprise because this network is used as the default by a virtual datacenter

VLAN-48

The virtual network is not unmanaged

VLAN-49

Cannot delete unmanaged networks associated with virtual machines

VLAN-50

Enterprise link with rel 'enterprise' is mandatory

VLAN-51

The IP %s is in quarantine

VLAN-52

Invalid input. Repeated NIC attachment value is not allowed

VLAN-53

Cannot edit the name and gateway of the VLAN because it has IPs assigned to virtual machines

VLAN-54

Unmanaged IP cannot be put in quarantine

VLAN-55

The network service type does not belong to the same datacenter as the VLAN

VLAN-56

The virtual network is not an external network

VLAN-57

Invalid input. Repeated IP href value is not allowed

VLAN-58

The requested VLAN does not exist

VLAN-59

The IP supplied does not belong to an unmanaged network

VLAN-60

When editing an UnmanagedIp, you may only change the attribute 'ip'

VLAN-67

Private VLAN tags are automatically allocated and cannot be changed

VLAN-68

The IP %s is not available

VLAN-69

Cannot create an IP in networks other than IPv6 networks

VLAN-70

The IP does not belong to the network

VLAN-71

All IPs in the network are already created

VLAN-72

The requested IP is already created in the network

VLAN-73

The supplied IP format does not match the IP version

VLAN-74

Cannot change the IP version of a VLAN

VLAN-75

IPv6 networks can have a netmask of 64, 56 or 48

VLAN-76

Cannot get a new MAC address for the IP

VLAN-77

Cannot create unmanaged IPs. Abiquo does not create IPs for unmanaged networks

VLAN-78

Cannot create IPs manually in strict networks

VLAN-79

Attributes 'gateway' and 'strict' cannot be changed when editing an IPv6 VLAN

VLAN-80

IPv4 VLANs cannot be strict

VLAN-81

Address attribute is required

VLAN-82

Mask attribute is required and must be equal or greater than 0

VLAN-83

Cannot set the IP as 'not available' while it is attached to a virtual machine

VLAN-84

At least one IP should be requested in order to create IPs

VLAN-85

The requested number of IPs to create is out of range

VLAN-86

Cannot create IPs because too many IPs were requested

VLAN-87

Invalid IPv6 format

VLAN-88

The IP is not within the allowed range of the VLAN

VLAN-89

The literal of the first IP is required

VLAN-90

The assigned VLAN tag is already in use by another existing network

VLAN-91

VLAN network edition is not supported

VLAN-92

The VLAN requested has no Global Network

VLAN-93

The device does not support this networking operation

VLAN-94

Invalid link to the VLAN network

VLAN-95

Invalid link to external IP address to create NIC

VLAN-96

Invalid link to IP address

VLAN-97

Could not free VLAN network tag from virtual machine delete

VLAN-98

Cannot assign this range to the VLAN because part or all of the range has been excluded by the administrator

VLAN-99

The format of the range is invalid

VLAN-100

Invalid domain name provided as VLAN DNS suffix

VLAN-101

This IP address is currently used by a virtual machine. It cannot be deleted

VLAN-102

Cannot delete an IP while it is assigned to an enterprise

VLAN-103

DHCP IP is outside of the network range

VLAN-104

Private IPs only can be reserved

VLAN-105

Cannot reserve an IP without providing a reason

VLAN-106

Cannot reserve an IP for a virtual machine in a different VDC

VLAN-107

The IP %s is reserved

VLAN_61

The requested IPs are not from an external network

VLAN_62

The requested IPs are not from an unmanaged network

VLAN_63

The requested IPs are not from a public network

VLAN_64

The requested IP is not from an external network

VLAN_65

The requested IP is not from an unmanaged network

VLAN_66

The requested IP is not from a public network

VM HR

 

VM-HR-1

It is not possible to modify the cores per socket of the virtual machine in its current state. Power it off first

VM clone

 

VM_CLONE-1

Clone of virtual machine from persistent templates is not allowed

VM_CLONE-2

Clone of imported virtual machines is not allowed

VM_CLONE-3

Clone of null virtual machine is not allowed

VM_CLONE-4

Null options are provided to clone the virtual machine

VM_CLONE-5

Null user was provided to clone the virtual machine

VM_CLONE-6

No public IPs available to clone virtual machine

VM_CLONE-7

No private IPs available to clone virtual machine

VM_CLONE-8

No external IPs available to clone virtual machine

VM_CLONE-9

No unmanaged IPs available to clone virtual machine

VM_CLONE-10

No floating IPs available to clone virtual machine

VM_CLONE-11

Unable to clone virtual machine

VM_CLONE-12

Clone of captured virtual machines is not allowed

VM relocate

 

VM-RELOCATE-1

To relocate virtual machine the target machine link is required

VM-RELOCATE-2

The selected target hypervisor doesn't satisfy one or more constraints

VM-RELOCATE-3

The virtual machine relocate operation is not supported by the plugin

VM-RELOCATE-4

The virtual machine must be deployed in order for it to be relocated

VM-RELOCATE-5

Relocate of virtual machine is not allowed in public cloud regions

VM-RELOCATE-6

The relocate operation must be done between machines in the same datacenter

VM-RELOCATE-7

The relocate operation must be done between machines in the same rack

VM-RELOCATE-8

Relocate operation to the same machine is not allowed

VM-RELOCATE-9

Relocate between different hypervisor types is not allowed

VM-RELOCATE-10

The virtual machine must have datastore tier for all disks

Version

 

VERSION-1

Invalid version format

VERSION-2

No logo exists for the requested version

VERSION-3

No animated logo exists for the requested version

Virtual appliance

 

AAFFINITY-0

The anti-affinity layer requires more machines than currently available in the datacenter

AAFFINITY-1

The anti-affinity layer requires more machines than currently available in the rack

LAYER-0

The layer already exists. To add virtual machines to an existing layer, use virtual machine reconfigure

LAYER-1

Cannot create a new layer by reconfiguring the virtual machine. Use the define layer feature

LAYER-2

Layer creation requires exactly two virtualmachine links

LAYER-3

Cannot create layer because one or more of the virtual machines is already associated with a layer

LAYER-4

Cannot delete layer because it is associated with more than one virtual machine

LAYER-5

Malformed layer link

LAYER-6

Cannot move a deployed virtual machine from one layer to another

LAYER-7

Cannot remove association between a layer and one virtual machine. Use the delete layer feature

LAYER-8

Cannot associate the virtual machine with this layer because the virtual machine is already allocated to a hypervisor that is incompatible with the layer

VAPP-0

The requested virtual appliance does not exist

VAPP-1

The virtual appliance is not deployed

VAPP-2

The virtual appliance is not running

VAPP-3

The virtual appliance is deployed

VAPP-5

The virtual appliance cannot be deleted in this state. It should be NOT_DEPLOYED, UNKNOWN or EMPTY

VAPP-6

The virtual appliance cannot be moved because it has no link to its virtual datacenter

VAPP-7

The virtual appliance cannot be moved or copied because the target virtual datacenter is not in the same datacenter

VAPP-8

The virtual appliance cannot be moved in this state. It should be NOT_DEPLOYED

VAPP-9

The virtual appliance cannot be moved or copied because it contains captured virtual machines

VAPP-10

The virtual appliance cannot be moved or copied because it contains virtual machine templates that are not compatible with the target hypervisor

VAPP-11

The virtual appliance cannot be copied because it contains persistent virtual machine templates

VAPP-12

The virtual appliance does not contain any virtual machines

VAPP-13

The virtual appliance cannot be copied in this state. It should be NOT_DEPLOYED

VAPP-14

The virtual appliance move DTO does not contain the ''original'' link

VAPP-15

The virtual appliance move DTO does not contain the ''source'' link

VAPP-16

There are no virtual machines in the specified layer

VAPP-17

The length of the layer property must be between 0 and 255 characters

VAPP-18

The virtual appliance cannot be moved or copied because the target virtual datacenter is not in the same enterprise

VAPP-19

The virtual appliance cannot be created because of validation errors

VAPP-20

Error undeploying virtual appliance

VAPP-21

Invalid virtual appliance link

VAPP-22

No target virtual appliance is specified and current is already restricted

Virtual appliance specs

 

SPEC-0

The requested virtual appliance spec does not exist

SPEC-1

Not enough privileges to assign different user scope to virtual appliance spec

SPEC-2

Cannot create a new spec version. Spec not found for this virtual appliance

SPEC-3

Cannot create a spec version because the spec's scopes is greater than the current user's scope

SPEC-4

Expected default spec value (true/false)

SPEC-5

The requested virtual appliance does not have any virtual machine. It is not possible to create a spec

SPEC-6

Cannot create the spec, the tier ID is not properly set

SPEC-7

Cannot create the spec, the datastore tier ID is not properly set

SPEC-8

Cannot create the spec, the virtual machine template ID is not properly set

SPEC-9

Cannot create a version of a spec that belongs to another enterprise

SPEC-10

Cannot delete the requested spec because it belongs to another enterprise

SPEC-11

Cannot modify the requested spec because it belongs to another enterprise

SPEC-12

Cannot create the spec, the virtual appliance has persistent virtual machines

SPEC-13

Disk must have a default datastore tier

SPEC-14

Cannot materialize spec due validation errors

SPEC-15

There are not enough public networks to materialize the spec

SPEC-16

There are no available datastore tiers to assign to the defined disks

SPEC-17

Access to spec is not allowed. Enterprise is not included in spec's scope

SPEC-18

Missing vdcId query parameter

SPEC-19

Access to spec is not allowed for this location

SPEC-20

Not enough public networks to create the virtual appliance spec

SPEC-21

Firewall device must be created in your VDC to support firewalls needed for this Spec

SPEC-22

Load balancer device must be created in your VDC to support load balancers needed for this Spec

SPEC-23

Spec with extra hard disks is not supported in this VDC

SPEC-24

Spec with volumes cannot be deployed in a public cloud region

SPEC-25

Not enough public IPs to create the virtual appliance spec

SPEC-26

There are not enough available IPs materialized for the spec to assign to this virtual machine

SPEC-27

Cannot edit spec because the spec's scopes are greater than the current user's scope

SPEC-28

Backup configurations from the spec will not be materialized in a public cloud region

SPEC-29

Could not find a template to match the VApp spec template

SPEC-30

Could not find a datastore tier that is compatible with the VApp spec datastore tier

SPEC-31

Could not find a storage tier that is compatible with the VApp spec storage tier

SPEC-32

The number of private networks to materialize is different from the number in the spec definition.

SPEC-33

Could not find a backup policy compatible with the VApp spec backup policy

SPEC-34

Cannot create the spec, the backup policy ID is not properly set

SPEC-35

Cannot materialize the backup policies because the configurations do not match

SPEC-36

Cannot materialize the backup policies because the sources do not match

SPEC-37

Could not find a hardware profile compatible with the VApp spec requirements

SPEC-38

This spec is configured to use multiple policies in the same virtual machine but this is not allowed

SPEC-39

This spec contains load balancers that require not supported NAT IPs

SPEC-40

This spec contains virtual machines that require not supported NAT IPs

SPEC-41

There are not enough available NAT IPs for the required ports

SPEC-42

Error while creating the spec from the virtual appliance, nat ip is using a private network that should already exist in the current build spec process. Contact your administrator

SPEC-43

The external networks spec requires an existent external vlan

SPEC-44

There are some spec ids and entity ids related missing in the request

SPEC-45

Firewalls routing to other firewalls are not supported in this provider. These rules will be ignored when materializing the spec

SPEC-46

The datastore tiers set are not compatible with datastore tiers recommended of the virtual machine template

Virtual conversion

 

VASC-0

The requested persistent conversion does not exist

VASC-1

Invalid expected state

Virtual datacenter

 

VDC-0

The requested virtual datacenter does not exist

VDC-1

Invalid hypervisor type for this virtual datacenter

VDC-2

This virtual datacenter contains virtual appliances and cannot be deleted without removing them first

VDC-3

This virtual datacenter has volumes attached and cannot be deleted without removing them first

VDC-4

This virtual datacenter has networks without IP addresses

VDC-5

Cannot edit resource limits; current virtual datacenter allocation exceeds the new specified limits (see SYSTEM traces in order to determine which resources are at HARD limit)

VDC-6

Virtual datacenter must be created with a private network

VDC-7

Virtual datacenter must have at least one private VLAN

VDC-8

Cannot edit resource limits; current virtual datacenter allocation exceeds the new specified limits

VDC-9

The provided virtual datacenter link is invalid

VDC-10

The target virtual datacenter must be the same for this action

VDC-11

This virtual datacenter has load balancers and cannot be deleted without removing them first

VDC-12

Cannot perform logical delete. You should do it over virtual datacenter of public cloud region

VDC-13

Cannot create a VDC in this region because the user will not be allowed to manage the VDC

VDC-14

Virtual datacenter does not have a providerId (it has been deleted in the provider) so cannot perform the current action

Virtual machine

 

VM-0

The virtual machine does not have a hypervisor assigned

VM-1

The requested virtual machine does not exist

VM-2

The virtual machine is already locked by another operation

VM-02

Error reconfiguring virtual machine

VM-3

The virtual machine is not deployed

VM-4

The virtual machine cannot change to the required state

VM-5

The virtual machine cannot change state due to a communication problem

VM-6

The virtual machine does not support the action PAUSE

VM-7

The allowed state for deploying virtual machines is NOT_ALLOCATED

VM-8

Virtual machine(s) in the LOCKED state cannot be deleted

VM-9

The requested virtual machine template does not exist

VM-10

The virtual machine is in a state that does not allow the request, therefore it cannot be modified

VM-11

The virtual machine is not in any hypervisor. Therefore the change of state cannot be applied

VM-12

The allowed power states for virtual machine deployment are ON, OFF, PAUSED, UNKNOWN or ALLOCATED

VM-13

Virtual machine configuration actions can only be performed when the virtual machine is NOT_ALLOCATED or OFF

VM-14

Only the 'used' attribute of the virtual machine network configuration can be changed

VM-15

There should be at least one 'used' network configuration in each virtual machine

VM-16

The virtual machine template supplied is not available in the virtual appliance's datacenter

VM-18

The virtual machine template is not compatible and there is no compatible conversion

VM-19

The virtual machine template has a compatible conversion but it is not ready (in progress or failed)

VM-20

To perform this action, the virtual machine must be in NON_MANAGED state

VM-21

The virtual machine node does not exist

VM-23

Cannot restore the original virtual machine after a failed reconfigure; the original virtual machine info was not found

VM-24

The resource is already used by another virtual machine

VM-26

The allowed power state for resetting a virtual machine is ON

VM-27

The allowed power state for creating an instance of a virtual machine is OFF

VM-32

Cannot reconfigure the virtual machine template when the virtual machine is present in the hypervisor

VM-33

We do not currently allow imported virtual machines to be reconfigured

VM-34

Only 'cpu' and 'ram' can be reconfigured in imported virtual machines

VM-44

You are trying to undeploy an imported virtual machine. If you undeploy it, the virtual machine template cannot be recovered. To proceed with the undeploy, please call this functionality again with the 'forceUndeploy=true' option

VM-45

Some of the resources indicated are already used

VM-46

At least one IP address must be supplied when changing virtual machine NICs in deployed machine

VM-47

At least one hard disk must be supplied using a link when changing virtual machine hard disks

VM-48

Disk already attached to this virtual machine

VM-49

You have exceeded the number of NICs that can be added to a virtual machine

VM-50

You are not permitted to add two NICs with IPs in the same VLAN

VM-51

Cannot create a virtual machine because the persistent virtual machine template is not ready

VM-53

ESXi only supports memory sizes that are a multiple of 4

VM-54

Virtual machine contains extra HardDisk and/or Volumes with the same sequence, try detaching some external storage.

VM-55

Cannot attach more than 4 disks to an IDE controller

VM-56

Invalid virtual machine description: missing primary disk, hardware profile or identifier.

VM-57

The hypervisor where the virtual machine is deployed is not running properly. Contact your System Administrator

VM-58

There are no IP addresses available in the default network for use by a virtual machine.

VM-59

Virtual machine cannot be reconfigured due to unexpected errors. Contact your System Administrator

VM-60

Cannot change the layer of a virtual machine that has been assigned to a hypervisor

VM-61

The disk link(s) supplied are missing the type attribute or it is invalid

VM-62

Invalid input. Repeated disk attachment value is not allowed.

VM-63

Invalid input. Repeated disk href value is not allowed.

VM-64

Cannot create an instance of a virtual machine that is not managed by the platform. Please capture the virtual machine then try again

VM-65

The name of the node is required

VM-66

Cannot deploy the virtual machine because target physical NIC cannot be found. The physical NIC where the virtual NIC with IP was attached may have been removed directly in the hypervisor

VM-67

Virtual machine link not found

VM-68

Malformed virtual machine link

VM-69

Current target hypervisor does not have the required physical NICs to allocate the requested IPs

VM-70

The primary disk of the virtual machine cannot be modified

VM-71

At least one primary (sequence 0) disk must be defined.

VM-72

Primary disk of virtual machine should be unique.

VM-73

VRDP passwords should be up to 8 characters

VM-74

Invalid character in password. VRDP password characters should be in range [a..z][A..Z][0..9]

VM-75

The Virtual Machine has two NICs using IPs in the same VLAN

VM-76

Cannot update the resources in target physical machine and datastore

VM-77

To capture a virtual machine, the virtualmachine link from the infrastructure context is required

VM-78

Malformed virtual machine link from infrastructure to capture

VM-79

The virtual datacenter is not compatible with the hypervisor from which you are capturing the virtual machine

VM-80

Disk sequences cannot be repeated

VM-82

The disk sequence does not match the data retrieved from the hypervisor

VM-83

The disk size does not match the data retrieved from the hypervisor

VM-84

The size and the sequence are required properties of the disk

VM-85

Some disks on the remote virtual machine cannot be captured

VM-86

Every NIC defined requires a VLAN link

VM-87

Malformed VLAN link

VM-88

The VLAN link contains an invalid virtual datacenter

VM-89

The VLAN link contains an invalid enterprise

VM-90

The VLAN link contains an invalid datacenter

VM-91

IP sequence cannot be repeated

VM-92

The selected IP is already attached to another virtual machine

VM-93

Malformed IP address

VM-94

The IP from the remote virtual machine does not match the NIC defined by the user in the same sequence

VM-95

The IP from the remote virtual machine does not match the NIC defined by the user with the same MAC address

VM-96

The MAC address, the IP address and the sequence are required properties of the NIC

VM-97

There are some NICs on the remote machine that cannot be captured

VM-98

The public IP was not purchased for this virtual datacenter

VM-99

The requested IP is in quarantine

VM-100

The requested IP is not available

VM-101

The network service type of the VLAN does not match the network service type of the selected network interface in the hypervisor

VM-102

The selected remote IP is using a tag that is incompatible with the selected VLAN network

VM-103

The selected remote IP is using a tag that is already used by a different VLAN than the selected one

VM-104

Cannot assign the VLAN tag to the selected VLAN because it is out of rack range

VM-105

The selected rack will not allow new VLAN tags

VM-106

A virtual machine must be captured in order to be released

VM-107

A virtual machine must be deployed in order to be released

VM-108

Virtual machine cannot be reconfigured because of invalid new values

VM-109

You are trying to undeploy a virtual machine using a template that is not stored in the Apps Library. If you undeploy it, the virtual machine template cannot be recovered. To proceed with the undeploy, please call this functionality again with the 'forceUndeploy=true' option

VM-110

Virtual machine is using a template without a system disk file. It cannot be deployed.

VM-111

Virtual machine cannot be created from a virtual machine template without a disk file

VM-112

Cannot perform this action because the cores per socket setting is not available for this hypervisor

VM-113

Virtual machine cannot be created from a virtual machine template that is not in the DONE state; check the state and pending tasks

VM-115

Cannot select an IPv6 strict network to capture a virtual machine

VM-116

The provider of the given virtual machine does not have support for virtual machine metrics. The monitoring flag cannot be modified.

VM-117

No candidate machine is capable of handling the requirements of the Network Service Type: could not deploy the Virtual Machine and attach its NICs properly

VM-118

The virtual machine is already protected

VM-119

The virtual machine is not protected

VM-120

The virtual machine is protected and cannot be used

VM-121

The virtual machine requires at least one IP while it is running

VM-122

A disk in sequence position 0 is required to capture the remote virtual machine

VM-123

Cannot capture a virtual machine with persistent disks

VM-124

Some disk or volume sequences in the instance request are not found in the virtual machine

VM-125

The MAC address of the remote IP is required, check the remote VM configuration

VM-126

The identifier of the remote hard disk is required, check the remote VM configuration

VM-127

The identifier of the remote volume is required, check the remote VM configuration

VM-128

Invalid ISO disk format in the instance.

VM-129

The primary disk (sequence 0) must be bootable.

VM-130

Invalid virtual machine description: At least one primary (sequence 0) disk must be defined.

VM-131

Datastore is required in disk for virtual machine description

VM-132

There are disks in a datastore with no tier or not allowed to be used in the destination enterprise

VM-133

Hypervisor does not support changing the virtual machine CPU in the current state

VM-134

Hypervisor does not support changing the virtual machine RAM in the current state

VM-135

Hypervisor does not support changing the virtual machine disks in the current state

VM-136

Hypervisor does not support changing the virtual machine network interfaces in the current state

VM-137

Hypervisor does not support changing the virtual machine remote access in the current state

VM-138

Virtual machine template is not configured to support changing the CPU in the current state

VM-139

Virtual machine template is not configured to support changing the RAM in the current state

VM-140

Virtual machine template is not configured to support changing the disks in the current state

VM-141

Virtual machine template is not configured to support changing the network interfaces in the current state

VM-142

Virtual machine template is not configured to support changing the remote access in the current state

VM-143

It is not possible to decrease the CPU of the virtual machine in its current state. Power it off first

VM-144

It is not possible to decrease the RAM of the virtual machine in its current state. Power it off first

VM-145

Cannot capture a virtual machine without NICs

VM-146

CPU value outside the maximum and minimum values defined in the virtual machine template

VM-147

RAM value outside the maximum and minimum values defined in the virtual machine template

VM-148

You are trying to undeploy a virtual machine with one or more disks that are not stored in the Apps Library, only on the hypervisor datastore. If you undeploy, you won't be able to recover those disks. To proceed with the undeploy, please call this functionality again with the 'forceUndeploy=true' option.

VM-149

A deployed virtual machine was expected for this action

VM-150

The selected VLAN %s for IP from sequence %s should be the VLAN %s

VM-151

The IP of sequence %s belongs to a VLAN that does not exist in the platform

VM-152

Cannot capture a virtual machine from a hypervisor that doesn't use a network device to a virtual datacenter that uses a network device

VM-153

Cannot capture the virtual machine because the disk with UUID %s is already used by another virtual machine

VM-154

The virtual machine does not have an active hardware profile link so it cannot be deployed

VM-155

The VM has no owner or the owner does not have an email configured. Cannot generate and send the password for the guest operating system

VM-156

Cannot reconfigure the virtual machine until synchronization is completed. Please wait until lastSynchronize is updated.

VM-157

Cannot create virtual machine fetching metrics. Monitoring is not enabled.

VM-158

The virtual machine must use one of the hardware profiles that are recommended for this template

VM-159

Invalid FQDN provided

VM-160

Cannot modify the FQDN while the VM is deployed

VM-161

Generating an initial guest password requires guest customizations in the virtual machine template and support by the plugin

VM-162

Cannot modify the option to generate an initial guest password while the VM is deployed

VM-163

Could not get the remote access console for the virtual machine

VM-164

To get the remote console the virtual machine must be in state ON

VM-165

Windows hostname cannot exceed 15 characters in length

VM-166

You cannot move or restrict a VM that is part of a scaling group. Perform this action on the scaling group instead

VM-167

You are trying to delete a virtual machine associated with one or more action plans. If you delete the virtual machine, the related actions plans will be affected. To proceed with the delete, please call this functionality again with the 'force=true' option.

VM-168

CPU must be specified.

VM-169

RAM must be specified.

VM-170

Cannot select the disks to create an instance of a virtual machine in this provider.

VM-171

Cannot attach IPs in VLANs from different availability zones

VM-172

Cannot attach volumes from different availability zones

VM-173

Cannot attach volumes from different availability zones than the attached VLANs

VM-174

Cannot attach volumes from different availability zones than the default VLAN in the virtual datacenter. Specify an IP in another VLAN with the same availability zone as the desired volume.

VM-175

If you release the VM, the firewall and/or loadbalancer will still have an association with the VM but it will be invalid so errors may occur.

VM-176

The virtual machine must use one of the datastore tiers that are recommended for this template but one or more of the disks in the template is not configured to use a recommended tier

VM-177

Cannot associate the virtual machine with more than one availability set

VM-178

Cannot change the availability set of a virtual machine

VM-179

The availability set must be from the same virtual machine's virtual datacenter

VM-180

Resetting a guest password requires an initial guest password

VM-181

Resetting a guest password requires guest customizations in the virtual machine template

Virtual machine template

 

CONSTR-SNAPSHOT-LENGTH-NAME-MAX

The length of the NAME parameter must be less than 255 characters

CONSTR-SNAPSHOT-LENGTH-NAME-MIN

The length of the NAME parameter must be greater than 1 characters

VIMAGE-0

The requested virtual machine template does not exist

VIMAGE-1

The virtual machine template supplied is not an instance

VIMAGE-2

Invalid virtual machine template identifier in the virtual machine template link

VIMAGE-3

Invalid datacenter repository identifier in the datacenter repository link

VIMAGE-7

The requested virtual machine template is a master template; master templates cannot be deleted

VIMAGE-9

Cannot delete the requested shared virtual machine template because it belongs to another enterprise

VIMAGE-10

The virtual machine template is being used by virtual machines and cannot be deleted

VIMAGE-12

Malformed icon URL

VIMAGE-13

The virtual machine template is not a persistent template

VIMAGE-14

Cannot modify a failed persistent virtual machine template

VIMAGE-15

Cannot modify a persistent virtual machine template that is in progress

VIMAGE-16

No template definition link found

VIMAGE-17

Invalid template definition link

VIMAGE-18

The requested template is already present for the current enterprise in the datacenter provided.

VIMAGE-19

A persistent virtual machine template that is in progress cannot be deleted

VIMAGE-20

The disk type of a persistent virtual machine template cannot be modified

VIMAGE-21

A persistent virtual machine template cannot be shared

VIMAGE-22

The path of a persistent virtual machine template cannot be modified

VIMAGE-23

The HD required of a persistent virtual machine template cannot be modified. Resize the primary disk instead

VIMAGE-24

The disk file size of a persistent virtual machine template cannot be modified

VIMAGE-25

Missing virtual machine template link

VIMAGE-26

Invalid virtual machine template link

VIMAGE-27

The request to create a virtual machine template must include a template definition link

VIMAGE-28

Cannot promote a virtual machine template instance with QUEUED conversions; please wait for them to finish then try again.

VIMAGE-29

The virtual machine template belongs to another enterprise and is not a shared template.

VIMAGE-30

Cannot delete virtual machine template because conversions are in progress.

VIMAGE-31

Cannot delete instance of virtual machine template because a conversion of this instance is still in progress.

VIMAGE-33

Cannot delete the disk file of a persistent virtual machine template

VIMAGE-34

Current virtual machine template is not being used by any deployed virtual machines and it has no instances. Use template delete

VIMAGE-35

Virtual machine template disk file is not found or currently unavailable in the repository filesystem.

VIMAGE-36

Cannot process a virtual machine template creation event from datacenter repository refresh check.

VIMAGE-37

Current virtual machine template already unavailable

VIMAGE-38

The path of a public cloud template cannot be modified

VIMAGE-39

A public cloud template already exists for this path identifier

VIMAGE-41

The disk format type of a public cloud template must be compatible with the provider

VIMAGE-42

Could not modify disk information; use the new Disk resource

VIMAGE-43

Could not modify a virtual machine template with multiple disks

VIMAGE-44

Current virtual machine template operation requires a single disk but more have been specified

VIMAGE-45

Could not modify a template with multiple disks

VIMAGE-46

Could not modify disk info.

VIMAGE-47

A HardDisk or Volume is assigned a sequence position already in use in the virtual machine template

VIMAGE-48

Cannot create a virtual machine with an empty disk as the primary disk

VIMAGE-49

Invalid input. Repeated disk attachment value is not allowed.

VIMAGE-50

Invalid input. Repeated disk href value is not allowed.

VIMAGE-51

Cannot add/remove disk. Use Disk resource.

VIMAGE-52

A non persistent template cannot be moved between virtual datacenters

VIMAGE-53

The template is already linked to the given virtual datacenter

VIMAGE-54

The template is being used by a virtual machine and cannot be moved

VIMAGE-55

The operation is not allowed because the template/disk does not physically exist in the repository

VIMAGE-56

The template has not been completely deleted. One or more disks could not be deleted, please check the tracers for details. The template still exists with these failed disks.

VIMAGE-57

The enterprise of the virtual machine template source and target must be the same.

VIMAGE-58

A public cloud template has only one disk

VIMAGE-59

Cannot export a virtual machine template with persistent disks

VIMAGE-60

Cannot duplicate, promote or export a virtual machine template with only empty disks

VIMAGE-61

Invalid minimum CPU. Check VM CPU settings or recommended hardware profile

VIMAGE-62

Invalid maximum CPU. Check VM CPU settings or recommended hardware profile

VIMAGE-63

Invalid minimum RAM. Check VM RAM settings or recommended hardware profile

VIMAGE-64

Invalid maximum RAM. Check VM RAM settings or recommended hardware profile

VIMAGE-65

Cannot edit CPU/RAM or set minimum and maximum values for a public template with a hardware profile

VIMAGE-66

You are not allowed to access the templates of this enterprise from your current one

VIMAGE-67

Not enough privileges to assign different user scope to virtual machine template

VIMAGE-68

Access to template is not allowed. Enterprise is not included in template's scope

VIMAGE-69

Cannot edit template because the template's scopes is greater than the current user's scope

VIMAGE-70

Cannot edit template because the template belong to another enterprise

VIMAGE-71

Generating an initial guest password requires guest customizations

VIMAGE-72

Cannot exists a virtual machine template without disks

VIMAGE-73

Cannot edit CPU/RAM of a virtual machine template with hardware profile

VIMAGE-74

List Template Publishers is not available for private cloud

VIMAGE-75

The virtual machine template disks must use the datastore tiers that are recommended for this template.

VIMAGE-AM-DOWN

Check appliance manager configuration error

VIMAGE-INVALID-OVF-ALLOCATION-INITS

Virtual machine template cannot be added due to invalid allocation units

VIMAGE-REPOSITORY-CHANGED

Datacenter repository location has changed

VIMAGE-SYNCH-DATACENTER-REPOSITORY

Cannot obtain downloaded templates in the datacenter repository

Virtual private network

 

VPN-1

Invalid value for the Authentication field. Valid values are: PSK,CERTIFICATE

VPN-2

Invalid value for the DH group field. Valid values are: DH2,DH5,DH14

VPN-3

The requested VPN does not exist

VPN-4

Invalid local endpoint IP. Only NAT IPs are allowed

VPN-5

Missing virtual datacenter link

VPN-6

Only private networks are supported for VPN local networks

VPN-7

Local endpoint is autogenerated so cannot be supplied

VPN-8

Local endpoint is required

VPN-9

Encryption algorithm not supported

VPN-10

Diffie-Hellman Group not supported

VPN-11

Authentication mode not supported

VPN-12

Perfect Forward Secrecy cannot be disabled

VPN-13

Perfect Forward Secrecy is not supported

VPN-14

Cannot choose a set of networks to expose via VPN

VPN-15

Must choose a set of networks to expose via VPN

VPN-16

VPN update is not supported

VPN-17

Cannot create VPN

Virtual system monitor

 

VSM-0

An error occurred when monitoring the physical machine

VSM-1

An error occurred when shutting down the monitored physical machine

VSM-2

An error occurred when subscribing the virtual machine

VSM-3

An error occurred when unsubscribing the virtual machine

VSM-4

An error occurred when refreshing the virtual machine state

VSM-5

An error occurred when resetting the last known state of the virtual machine

VSM-6

An error occurred when checking and refreshing the virtual machine state

VSM-7

VSM service unavailable; check the URL of the service.

VSM-8

Cannot disable virtual machine monitoring

VSM-9

Cannot enable virtual machine monitoring

VSM-10

An error occurred when forcing the virtual machine definition sync

VSM-11

An error occurred when publishing the virtual machine definition

VSM-12

An error occurred when forcing monitor sync

Volumes

 

VOL-0

Could not create the volume in the selected tier

VOL-1

There are not enough resources in the selected tier to create the volume

VOL-2

The name of the volume is required

VOL-3

The volume does not exist

VOL-4

An unexpected error occurred while creating the volume

VOL-5

The volume cannot be deleted because it is associated with a virtual machine

VOL-6

Could not physically delete the volume from the target storage device

VOL-7

The volume cannot be deleted because it is being used in a persistent template process

VOL-8

The persistent volume cannot be deleted because it is being used in a virtual appliance

VOL-9

The connection field of the volume is required

VOL-10

The size of the volume cannot be reduced

VOL-11

The 'name' attribute of the volume cannot exceed 256 characters in length

VOL-13

The size property must be a non-zero integer up to 9223372036854775807

VOL-14

The volume cannot be edited because it is being used in a virtual machine

VOL-15

An unexpected error occurred and the volume could not be updated

VOL-17

The volume does not support the resize operation

VOL-18

Could not get the storage manager remote service

VOL-19

Could not add the initiator mappings

VOL-20

The requested initiator mapping does not exist

VOL-21

The volume is not attached to the virtual machine

VOL-22

Invalid link to the volume to attach

VOL-23

Invalid virtual datacenter in the link to the volume to attach

VOL-24

The volume is already attached to a virtual machine

VOL-25

The maximum number of attached disks and volumes has been reached

VOL-26

An unexpected error occurred while attaching the volume. Please contact the Administrator

VOL-27

The volume is already detached

VOL-28

An unexpected error occurred while detaching the volume. Please contact the Administrator

VOL-29

An unexpected error occurred while reconfiguring storage

VOL-39

The volume can only be moved to another virtual datacenter in the same datacenter

VOL-40

There are not enough resources in the selected pool to create the volume

VOL-41

The volume can only be moved to another virtual datacenter in the same enterprise

VOL-43

The pool must be iSCSI when creating generic iSCSI volumes

VOL-44

There is already a volume with that internal name

VOL-45

The internal name of the volume is required

VOL-46

The volume cannot be resized or removed from the virtual machine if it has snapshots

VOL-47

Cannot move a persistent volume. You should try to move the template

VOL-48

Cannot change the disk controller or controller type of the volume because it is being used in a deployed virtual machine

VOL-49

Cannot retrieve remote volumes in a storage device in a private datacenter

VOL-50

Cannot change the availability zone of a volume

VOL-51

Need to select an availability zone to create a volume

VOL-52

Volume encryption is not supported

VOL-53

Cannot encrypt/decrypt an existing volume

Workflow

 

WKF-01

Request to workflow endpoint failed

WKF-02

Cancellation of a workflow task failed

WKF-03

Continuation of a workflow task failed